Richter KNP-D/F Series Ball Valves (ISO/DIN) - Manual (Page 20)

Series KN/F, KNP/F, KN-D/F, KNP-D/F
Page 20
520-050-en Revision 10
TM 8361 Edition 10/2011
10.9 Dimensional drawing ball valve with actuator
DN H1 H2
Connect.
dimen. acc.
to ISO 5211
H3 H4 L L1 L2 L3 L4
15
50 60 F05
130 59
20 150 59
25 160 70
40 77
60 2) F07
200 88
50 80 230 107
80 118
80 F10
310 140
100 134 350 175
150
184 80 F12
480 240
200 1) 457 223,5
1) DN 200 with reduced bore DN 150
2) H2 = 80mm if F10 or F12 on the actuator side
Dimensions H3, H4, L1, L2 and L3 vary depending on the actuator manufacturer.
All dimensions in mm.
Flange connecting dimensions:
DIN EN 1092-2, type B (ISO 7005-2, type B) PN 16 or flanges drilled to ASME B16.5 Class 150.