Richter GR/F Series Check Valves - Manual (Page 2)

Series GR/F
Page 2
9550-075-en Revision 01
TM 6897 Edition 10/2007
List of Contents
List of Contents ........................................ 2
Relevant documents................................. 2
1 Technical data...................................... 2
1.1 Name plate, CE and body markings............ 3
1.2 Tightening
torques....................................... 3
1.3 Screw-in tool for seat................................... 4
1.4 Pressure/temperature
diagram ................... 4
2 Notes on safety .................................... 5
2.1 Intended use................................................ 5
2.2 For the customer / operator......................... 5
2.3 Improper
operation ...................................... 5
3 Safety notes for applications in
potentially explosive areas based on
the Directive 94/9/ EC (ATEX 95) ........ 6
3.1 Intended use................................................ 6
4 Safety note for valves, certified to
Clean Air Act (TA Luft)......................... 7
5 Transport, storage and disposal ........ 7
5.1 Storage ........................................................ 7
5.2 Return
consignments .................................. 7
5.3 Disposal....................................................... 7
6 Installation............................................ 8
6.1 Flange caps and gaskets.............................8
6.2 Direction of flow and installation position .....8
6.3 Grounding ....................................................8
6.4 Test
pressure...............................................8
7 Operation.............................................. 8
7.1 Initial commissioning....................................8
7.2 Improper operation and their consequences
.................................................................8
7.3 Shutdown .....................................................8
8 Malfunctions ........................................ 9
9 Maintenance......................................... 9
9.1 Demontage ..................................................9
9.1.1 Replacing plug 9
9.1.2 Replacing seat 9
9.2 Montage .......................................................9
10 Drawing .............................................. 10
10.1 Legend .......................................................10
10.2 Sectional drawing.......................................10
10.3 Dimensional drawing..................................11
Relevant documents
Declaration of conformity acc. to the EC Pressure
Equipment Directive 97/23/EC Form for Safety Information Concerning the
Contamination QM 0912-16-2001_en
1 Technical data
Manufacturer:
Richter Chemie-Technik GmbH
Otto-Schott-Str. 2
D-47906 Kempen
Telephone : +49 (0) 2152 146-0
Fax:
+49 (0) 2152 146-190
E-Mail: [email protected]
Internet: http://www.richter-ct.com
Designation :
Plug check valve, series GR/F with solid plug
Certified to Clean Air Act (TA Luft)
Strength and tightness (P10, P11) of the pressure-
bearing body tested to DIN EN 12266-1.
Gas-tight (P12) in the seat to DIN EN 12266-1,
leak rate A.
Face to face alternatively:
EN 558-1 basic series 1, ISO 5752 series 1
with flanges DIN EN 1092-2, type B (ISO 7005-2
Type B) PN 16 or flanges drilled to ASME B16.5
Class 150
ANSI/ISA-75.08.01, Class 150 with flanges ASME
B16.5 Class 150, raised face
Materials :
Body material: Ductile cast iron EN-JS 1049 to DIN EN
1563 (0.7043 DIN 1693) or ASTM A395
Lining material: PFA
on request : conductive lining