SONIQ B100 - Manual (Page 14)

Settings
Network
1
Internet Connection: Display the internet connection state.
2
Information: Display the informations of the Network.
3 Connection Test: Test the internet connection state.
4
IP Setting: Setting the IP for the product.
1
TV Screen: Select the display mode for the TV.
2
Resolution: Select the resolution for the TV.
3 TV System: Select the TV system.
4
Color Space: Select the color space.
5
HDMI Deep Color: Select deep color for HDMI.
6
HDMI 1080P 24HZ: Turn on/off the HDMI 1080P
TV
• Connect this product to the broadband modem or router.
• This product starts to detect if there is a connection to the
network.
• If the connection test fails, select [
Retry] and press ENTER
to re-connect again to the network.
Display Setting
5 BD-Live Connecting: Set this function to Permitted, Partial
permitted, Prohibited.
6 Proxy Setting: Set the Proxy Setting to Disable, Enable,
Proxy Host, Proxy Port.
24HZ function
.
1
Sharpness:
Motion video: Select the video mode.
Select the sharpness mode.
V
Motion Video
ideo Process
Audio Setting
1
Spdif: Select the SPDIF mode.
2
HDMI: Select the HDMI mode.
3
Down Sampling: Select down sampling.
4 DRC: Select the DRC mode.
PAL
YCbCr
480P/576P
Sharpness Low
Sampling
SPDIF
Audio Output