SONIQ B100 - Manual (Page 8)

Connection
6
Note
• The type plate is located on the back of the product.
Caution
• Before connecting the AC power cord, ensure you have
completed all other connections.
Route audio to other devices
Tip
• The video input jack on the TV might be labeled as A/V IN,
VIDEO IN, COMPOSITE or BASEBAND.
• This type of connection provides standard picture quality.
VIDEO
VIDEO IN
VIDEO
1 Connect a composite video cable to:
• the VIDEO jack on this product, the VIDEO input jack on
the TV.
2 Connect the audio cables to
• the AUDIO L/R-AV OUTPUT jacks on this product.
the AUDIO input jacks on the TV.
Option 3: Connect to the composite video jack.
To enhance audio play, you can route the audio from this
product to other devices.
• This type of connection provides good picture quality.
Connect to digital amplifier/receiver
COAXIAL
COAXIAL
Connect a coaxial cable (not supplied) to:
• the COAXIAL jack on this product.
• the COAXIAL/DIGITAL input jack on the device.
Connect network
Connect analogue stereo system.
AUDIO
L
R
AUDIO IN
Connect the audio cables to:
• the AUDIO L/R-AV OUTPUT jacks on this product.
• the AUDIO input jacks on the device.
Connect this product to the network to enjoy software
updates and BD-Live bonus content.
Connect the network cable (not supplied) to:
• The LAN jack on this product.
• The LAN jack on the broadband modem or router.
• Note: before log in the internet, you first make sure
the unit is under default set.
Connect power
Connect the AC power cable to the wall socket.
This product is ready to be set up for use.
Cb/Pb Cr/Pr
Cb/Pb Cr/Pr
Cb/Pb Cr/Pr
Cb/Pb Cr/Pr