SONIQ DVP720 - Manual (Page 20)

26 19
←
→
SELECT MOVE
↑ ↓
The amplifier must be compatible with DTS to decode the signals
when DTS disc is played. Due to the various DTS encoding
systems, it is possible that some discs cannot be decoded.
AUDIO DIGITAL OUTPUT
Select Bitstream when this player is connected to a power
amplifier through coaxial or optical output. The power amplifier
must be able to decode Dolby Digital.
Select PCM when this player is connected to 2-channel digital
mode or stereo amplifier.
AUDIO SETTING PAGE
The se tting st ruc tur e is as fol lows :
Press the SETU P but ton twice to ent er int o Menu (whi le in st op
mode ), SYSTE M pag e icon is hi ghl ight ed. Th en pr ess the or
di rect ion but ton to sel ect AUDIO pag e icon. Th e scr een
show s as fol low :
FUNCTION SETTING
CHANNEL 2C H DOWNMIX
DIGITAL OUTP UT SET
AUDIO SETTING
DOLB Y BITSTREAM
DTS BITSTREAM
MPEG LP CM
PCM LP CM 48 KHz
DIGITAL OUTPUT ON
BACK EXIT
Press but ton to sel ect DIGITAL OUTP UT, Th en pr essE NTE R
but ton to mor e aud io set ting. Th e scr een show s as fol low :
If you feel the brightness ， color or contrast ratio need
adjustment during playback, press SETUP button. The picture
freezes and the TFT-LCD SETUP menu appears. Select
brightness，color or contrast ratio adjustment (navigating
with and buttons) and then press or buttons until
the desired brightness，color or contrast ratio is obtained.
Finally press PLAY key to resume playback mode.
Notes on the display:
1. Do not heat or scratch the display screen.
2. During playback, few bright or dark flecks may appear on
the TFT LCD, which is a normal phenomenon in active
matrix display technology, but not a malfunction.
3. Do not to set the unit in too bright a mode or play back the
disc with too bright images for a long time. This may cause
flecks to appear on the video.
Note : The available pixels of the TFT display up to a
99.99% level.
BASIC OPERATIONS
TFT PICTURE ADJUSTMENT
SETUP