SONIQ DVR200 - Manual (Page 14)

13
Normal Disc Playback
10. Angle
Press the ANGLE button while playing back a scene recorded with multiple angles.
Each time you press the ANGLE button, the angle will change.
11. Audio
Press the ANGLE button while playing back a scene recorded with multiple audio languages.
Each time you press the AUDIO button, the language will change (e.g. English, French, etc ).
12. Subtitle
Press the SUBTITLE button while playing back a scene recorded with multiple subtitle languages.
Each time you press the SUBTITLE button, the subtitle language will change (e.g. English, French, etc ).
13. Stop playback
1. Press the STOP button once, the playback is stopped.
If you press the PLAY/PAUSE or SELECT button, the playback resumes play from where it was stopped.
2.Press the STOP button twice then press the ENTER/PLAY button. In this case the disc starts playback again as if
you had just loaded it.
14. Menu
To return to the previous menu, press the MENU button while playing the disc.
15. TITLE
To return to the menu for title selection, press the TITLE button while playing the disc.
16. Mute
To mute audio output of the unit, press the MUTE button. The mute icon will appear on the screen.
17. Standby
The unit can be switched to standby by pressing the STANDBY button on the remote control. The power indicator
will glow red to indicate that it is in the standby mode.
To turn the unit on when it is in the standby mode, press the STANDBY button again. The power indicator will turn
green.
• The DVD player is not disconnected from the mains power supply while in the standby mode. So do not leave the
recorder in the standby mode unattended. If it is not going to be used for a long period, switch off and disconnect
from the mains supply.
• Moving the DVD video player during playback may cause damage to the disc as well as the player.
WARNING