Craftsman 65100 - Manual (Page 14)

14
This Air Cleaner will require a minimal amount of
assembly.
Remove all of the parts from the shipping box and lay
them on a clean work surface. Compare the items to
figure 1-2, verify that all items are accounted for before
discarding the shipping box.
If any parts are missing, do not attempt to plug in the
UNPACKING & INVENTORY
B. Eye-bolt 5/16-18 x 1-1/2” (4)
C. Flange nut 5/16-18 (4)
D. Rubber Pad (4)
Fig. 1-1
Fig. 1-2
A. Air Cleaner
A
C
D
B
WARNING !
power cord and turn “ON” the Air Cleaner. The Air
Cleaner should only be turned “ON” after all the parts
have been obtained and installed correctly. For missing
parts, contact Steel City at 1-877-SC4-TOOL.
CAUTION: Make certain shipping blocks have been
removed from between cabinet and blower assembly,
before unit is turned on. You will have to remove the
filters to access shipping blocks.
The following items are to be provided in the shipping
box: