SONIQ E32W13A - Manual (Page 5)

-7- -8-
Main Unit Control
No. Name Description
Remote Control
Sensor Window
Receives the signal from the remote control. Do not put any
objects in front of the window in order not to hinder the
reception of signals.
Press VOL+ to increase volume, or VOL - to decrease.
At the OSD menu, press these buttons to move the selection
focus left and right to change settings.
Power Indicator
Flashes red when the unit is powered on;
Lights up red when the unit is in standby mode.
VOL+/-
CH+/-
SOURCE
MENU
STANDBY
Press these buttons to sequentially select channels.
When the OSD menu is on, press these buttons to move the
selection focus up or down to change settings.
Press to display all possible input signal sources.
Press to cycle through various sources.
Press this button to display the OSD menu.
When the OSD menu is on, press this button to exit the menu.
Press this button to turn the unit on when it is in standby mode.
Press this button once more to put it to standby mode.
Connect the HDMI signal.
Connect the PC VGA signal output of your personal computer.
7
Connect for media files playback and program recording.
HDMI1/HDMI2/HDM3
Connect the component video signal . YPbPr
USB(REC)
Connect to external antenna. ANT IN
Main Unit Control
Rear Panel
DVI or PC VGA audio input.
VGA
AUDIO IN
Connect the video output of your AV equipment to the unit.
1
2
3 4 5 6
1
3
4
5
6
2
DIGITAL AUDIO OUT
OPTICAL
Connect the OPTICAL to the Audio Amplifier using a optical cable.
8
2
9
AUDIO IN Connect the audio output of your AV equipment to the unit.
Front Panel
7 8 9
VIDEO IN