SONIQ E32W13A - Manual (Page 7)

Connection and setup
-11- -12-
Connection and setup
Connecting Antenna
Connecting Component Video Signais
1. Connect the component video output of your AV equipment to the unit COMPONENT YPbPr
terminals using a Component video cable. (green, blue, red cable)
2. Connect the audio output of your AV equipment to the unit AUDIO L/R input terminals using the
AV cable or equivalent.
1.Ensure the connector colors match, failure to connect the colors of the cables to the
corresponding colored terminals will result in an incorrectly color image or badly distorted image.
2.VIDEO and Ypbpr signal share the same audio input. you are required to use it individually at any
time.
R
e d
W
h
it e
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings/Houses
RF Coaxial Wire (75 ohm)
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Connecting Composite Video Signal
Composite video input is the most commonly used signal input. However, this type of input also prvides a less
optimal image quality. Many video sources can only output Composite video signals, for example,VCRs, camcorders
and Video game.
Connecting OPTICAL Signal
To achieve excellent sound quality, we recommend users to use the high powered speakers such as the
SONIQ CSA32.
• Connect the Composite (AV) output of your AV equipment to the Composite VIDEO signal terminal on
the unit using a Composite (AV) video cable (RCA connector) as illustrated.
• Before connecting any component, please familiarize yourself with the location and type of each input.
• If incorrect connections are made, picture or color quality may be adversely affected. Please ensure
that all connectors are firmly seated.
Before connecting, turn off the power to the external devices for safety.
R e d
W
h it e
Y e ll o w
Composite (AV)
video cable
Video game
SONIQ does not supply these cables
Optical input
DIGITAL
AUDIO OUT
(OPTICAL)