SONIQ E42S14A E47S14A E55S14A - Manual (Page 11)

21 22
Smart TV Function Smart TV Function
Tips for Network Settings
Wi-Fi Direct
HOME - > Settings - > Network and location settings - > Wi-Fi direct
The connected device must acquire the Wi-Fi Direct certificate.
Wi-Fi Direct can at any time realize interconnection without the help of Wi-Fi router and
AP.
1. Make sure the Wi-Fi Direct is enabled both on TV and the connected device.
2. Enable the Wi-Fi Direct at the connected device.
3. The devices which are available for TV connection display in the window list.
4. Select the device you are willing to connect to the TV then choose YES if connecting
request appears.
5. If the connected device accepts the request, then the connecting setup has been done.
Use a standard LAN cable with a connector.
Many network connection problems during set up can often be fixed by re-setting the
router or modem. After connection to the home network, quickly power off
and / or disconnect the power cable of the home network router or cable modem. Then
power on and / or connect the power cable again.
Depending on the internet service provider (ISP), the number of devices that can
receive internet service may be limited by the applicable terms of service. For details,
contact your ISP.
We are not responsible for any malfunction of the TV and / or the internet connection
feature due to communication errors / malfunctions associated with your broadband
internet connection, or other connected equipment.
We are not responsible for problems within your internet connection.
Some content available through the network connection may not be compatible with
the TV.
You may experience undesired results if the network connection speed does not meet
the requirements of the content being accessed.
Some internet connection operations may not be possible due to certain restrictions
set by the internet service provider (ISP) supplying your broadband internet connection.
A 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to
this TV. If your internet service does not allow for such a connection, you will not be
able to connect the TV.
ADSL modem is required to use DSL service and a cable modem is required to use
cable modem service. Depending on the access method of and subscriber agreement
with your ISP, you may not be able to use the internet connection feature contained in
the TV or you may be limited to the number of devices you can connect at the same time.
(If your ISP limits sub-scription to one device, this TV may not be allowed to connect
when a PC is already connected.)
The wireless network operates at 2.4GHz radio frequencies that are also used by other
household devices such as cordless telephone, Bluetooth devices, microwave oven,
and can be affected by interference from them.
It may reduce the service speed using wireless network by surrounding wireless
condition.
Turn off all unused network equipment in your local home network. Some devices may
generate network traffic.
In some instances, placing the wireless router or access point higher up away from the
floor may improve the reception.
The reception quality over wireless depends on many factors such as type of the
access point, distance between the TV and access point, and the location of the TV.
To connect wireless AP, and AP that supports the wireless connection is necessary,
and the wireless connection. Function of the AP needs to be activated. Please enquire to the AP supplier for the
possibility of AP wireless connections.
Please verify the security settings of AP SSID for wireless AP connection, and
enquire to the AP supplier for the AP SSID security settings.
The TV can become slower or malfunction with wrong settings of network
equipments (wired / wireless router, hub, etc).
Please install correctly by referring to the manual of the equipment, and set the
network.
When AP is set it include 802. 11n, and if Encryption is designated as WEP or
WPA(TKIP / AES) and WPA2 hardware encryption schemes, the connection may not be
possible. There may be different connection methods according to the AP manufactures.