SONIQ E42S14A E47S14A E55S14A - Manual (Page 19)

37 38
OSD Menu Operation OSD Menu Operation
Precautions when using the USB device
1. Please do not turn off the TV or unplug the USB device when the connected USB storage device
is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage
device may be damaged.
2. Please use only USB storage devices that are formatted as a FAT32 file system , otherwise it
may not be recognized.
3. Every USB only supplys 500mA electric current, if the user’s device requirement is over the
specification, users need to choose to connect to the external power supply, otherwise the
device may not be recognized.
4. If the USB HDD does not have an external power supply, the USB device may not be detected.
So be sure to connect the external power supply.
5. The recommended capacity is 2TB or less for a USB external hard disk and 32GB or less for
USB flash memory.
6. The recognition speed of a USB storage device may depend on each device.
7. Please connect a USB storage device with the cable offered by the device maker.
8. Be sure to back up important files since data stored in a USB memory device may be damaged
We will not be responsible for any data loss.
9. If your USB memory device has multiple partitions, of if you use a USB multi-card reader, you
can use up to 4 partitions or USB memory devices.
10. If the USB memory device does not work properly, disconnect and reconnect it. How fast a
USB memory device is detected differs from device to device.
11. If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when
the TV is turned on.
12. Any device with more than the recommended capacity may not work properly.
In-Time Record
You can record the program you are watching. Press REC on the remote to start the recording.
Recording icon and recording time will be displayed at the right bottom of the Screen.
Stop Record
1. Press STOP button to stop the recording.
2. Press Navigation buttons to scroll to Yes,and press OK button.
Pre-record
1. Press EPG on the remote to open the program guide, select the program that you want to
record, then long press REC for three seconds to add the program to Pre-record list.
2. Press the green button on the remote to delete the selected recording group, yellow button to
delete all the recording group.
3. You can also enter PVR settings by the method of :MENU->OPTION MENU->PVR SETTING-
>SCHEDULED RECORD SETTING LIST. Select a blank recording group, then press OK to
enter the setting list to set the recording task.
Recording
00:00:19
Are you sure to stop the
recording?
2
Confirm
Confirm