SONIQ E46Z10A - Manual (Page 18)

и
и
и
и
и
DEL: You can press RED button to enter "DEL" menu, then choose the channel
you want to delete and press RED button again to delete.
RENAME: You can press / button to choose the channel you want to rename,
and press GREEN button to enter "RENAME" menu. In this menu,you
can press /button to select the character, then press / button to
adjust. (Note: Only available in ATV program.)
/ button to choose the channel in ATV mode you want
to move and press YELLOW button to move it.
SKIP: / button to choose the channel you want to skip and
press BLUE button to skip it when you change channels.
FAV: If you like the program of a channel, you can choose “FAV” button in the
menu to add it to your favorite list and later you can press “FAV” button
in the remote control to choose your favorite programs as soon as possible.
MOVE: You can press
You can press
Channel
Menu System Instruction
1. Press p/q key to select “ " option.
2. Press “Ok”or u key ,you can see the i
of the DTV channel.
DTV Manual Search
In the DTV source, you can choose “DTV Manual Search” to
enter “DTV Manual Search” menu.
You can use /button to choose the channel number and
press OK button to enter searching, and then the TV will
store the DTV channel if there is a DTV signal present.
ATV Manual Search
In the ATV source, you can choose “ATV Manual ” to
enter “ATV Manual ” menu.
Program Edit
You can use / button to choose “Program Edit” and
enter the menu, press the Red/Green/Yellow/Blue color
button on the remote control to delete, rename, move
and skip programs, also you can press FAV button to
add to your favorite list.
Used only in DTV)
NOTE: Signal Quality/Signal Strength (DTV Only):
Unlike analogue channels, which can vary in reception
quality, digital channels must have perfect reception
quality or you will not receive them at all. So, unlike
analogue channels, you are not able fine tune a digital
channel. If the signal strength indicates that the signal
is weak, a possible solution is to adjust your antenna
to increase the signal strength. Continue to adjust the
antenna until you find the best position with the
strongest signal.
Search
Search
Signal Information(
Signal Information
nformation
Time
Menu System Instruction
1. Press MENU key to display the main menu on
the screen.
2. Press p/q key to select "Time" option.
3. Press u key to enter "Time" submenu.
Sleep Timer
1. Press p/q key to select "Sleep Timer" option.
2. Press t/u key repeatedly until the desired time appears (Off, 10min, 20min, 30min,
60min, 90min, 120min, 180min, 240min).
Notes: The sleep timer you have set will be cancelled when the TV turns off or if a power
failure occurs.
1. Press p/q key to select "Auto Sleep" option.
2. Press t/u key to set it "On" or "Off".
1. Press p/q key to select "Time Zone" option.
2. Press t/u key to select time zone.
Off/On Time
In "Off Time" item, press /button or OK button to
enter the submenu, set the day & time to turn off the
TV set.
In "On Time" item, press /button or OK button to enter the submenu, set the time to
turn on the TV set, when the TV set is in the standby mode. You can also choose which
day to control your TV set in a week.
Notes: When the time is less than 60 seconds, remind information will be displayed on the
screen. Press any key button to cancel timer function.
Auto Sleep
When “Auto Sleep” is turned on, the TV set will be
in the standby mode10minutes later if there is no signal.
Clock
You can modify the time of your TV set, but when
you switch to DTV program, the "Clock" is decided
by the signal from your antenna.
Time Zone
You can choose it to modify your time zone in the TV set.
TIME
Select Menu:Exit
Clock 01/Jan 10:02
Off Time Off
On Time Off
Sleep Timer Off
Auto Sleep Off
Time Zone VIC
и
и
и
и
И
Storage To: You can press /button to change channels which are used to store
the searched channels.
Current CH:You can see the current channel number and you can press/button to
choose the channel you want to modify.
Search: You can use  button to search channels from low frequency to high
frequency and use  button to search channels from high frequency to
low frequency. When you have searched a channel, the searching will be
paused and you can press it again for other channels after you store the
channel.
Fine Tune: In case of unfavorable image or sound of TV program, you can use “Fine Tune”.
Frequency: You can see the frequency of the searched channels.
Note: Remeber to store the channel by pressing RED button after searching/Fine-tuning.
Select Menu:Return
CHANNEL
Color System PAL
Sound System BG
Auto Search
DTV Manual Search
ATV Manual Search
Programme Edit
Signal Information
Channel
Network
Modulation
Quality
Strength
Signal Information
37
Nine Melbourne
64QAM
100%
100%
ATV Manual Search
Storage To
Current CH
Search
Fine Tune
Skip
Frequency
Adjust
1
1
No
58.50 MHz
Exit Exit Save
Program Edit
TV
TV
TV
TV
TV
TV
TV
1 C-01
2 C-04
3 S-43
4 S-45
5 S-02
6 S-04
7 S-05
Delete Rename
MOVE Skip
FAV
EXIT
FAV
Exit
DTV Manual Search
UHF CH 37
DTV 3
Radio 0
Please select channel
Press OK to search
Bad Normal Good
Menu Return OK OK
-33- -34-