SONIQ F700 - Manual (Page 6)

- 12 -
Q:If I keep showing the same photo for a long time will it damage the
LCD screen?
A:No.The Digital Picture Frame can display the same photo continuously
for a long time. But it is recommended not to show the same
continuously for more than 1 month as this may screen burn
discolouration.
Q:Does the Digital Picture Frame have built-in memory?
A:The Digital Picture Frame does not have any internal memory to store
your photos. You must use a compatible memory card.
Q:What is the maximum picture size?
A:This unit supports JPEG pictures up to 10 Mega Pixels.
Q:What is the best picture resolution displayed on the screen?
A:The frame’s best resolution is 432 X 234 pixels.
Q:Why doesn’t the unit show some of my photos?
A:The Digital Picture Frame is designed to show photos following the
same camera industry standards format as digital cameras. This format
is a JPEG format. Images, such as web images, scanned images, or
photos in RAW format, are not stored according to camera industry
standards and therefore cannot be displayed correctly on the Digital
Picture Frame. Please ensure your camera is set to store pictures as
JPEG files or alternatively use a computer program to convert such
images before viewing them.
Frequently asked questions
- 5 -
Using the stand
Open the package remove
the protective sleeve from the unit.
Pull out and rotate the table stand
on the rear of your Digital Photo
Frame into the position shown.The
photo frame can be used in either
portrait or landscape.
Using the AC Adapter
1.Plug the adaptor into the DC IN 5V
socket on the side of your Digital
Photo Frame.
2.Plug the adaptor into a standard
three pin wall socket and switch
the power on at the wall.
3.Your Digital Photo Frame will
automatically switch itself on.
NOTE:
Wall mounting
Alternatively you can wall-mount the unit using the mounting hole at the back.
(Please note that the mountings are not included as part of this package but you can
Set up
use a standard screw head to the unit.) support