SONIQ F700 - Manual (Page 9)

- 8 -
You can press the MENU button at any time to enter the setup menu.
This will allow you to change some of the advanced settings on your Digital
Photo Frame.
The setup menu has 5 sub menus that can be navigated using the
control panel as explained on page 3.
Photo setting
● Interval Time:This option can be used to set the length of time for
display of each image from: 5 seconds, 10 seconds, 15 seconds, 30
seconds, one minute to three minutes.
● Transition Effect:This option is used to set the transition effect from
one photo to another. Choose between the different effects or choose
Random to get a different transition each time.
● Show Type:This option lets you decide whether the photo is displayed on
screen using Fit Screen (photo is always fully on the screen) or Full Screen
(photo always fills the screen – some clipping may occur).
● Slide Mode:This option allows you to set the Slide mode. There are two
available options: Normal and Motion.
● Browse: There are two kinds of Photo modes, File Manager mode, and
Thumbnail. Choose this depending on your preference and whether you
prefer to have a clock and calendar on screen with your photos.
Auto play
When Auto-Play is activated (ON) the picture frame will start a
slideshow immediately after selecting the photo icon.
When Auto-Play is not activated (OFF) the picture frame will enter
either File Manager mode or Thumbnail mode, according to the settings
in Photo Setting > Browse.
Advanced use
- 9 -
Display Setup
● Brightness:This option can be used to set the screen brightness. You
can choose from: Normal, Bright and Soft.
● Contrast:This option can be used to set the screen contrast. The contrast
can be set from -4 to 4.
● TFT Brightness:This option can be used to set the screen brightness.
The brightness can be set from -4 to 4.
● TFT Contrast:This option can be used to set the screen contrast. The
contrast can be set from -4 to 4.
● TFT Saturation:This option can be used to set the saturation of the
display. The saturation can be set from -4 to 4.
Custom setup
● OSD Language:This option can be used to set the language on screen.
You can choose from: English, French, German, Italian, Spanish,
Portuguese, Dutch, and Polish.
● Encoding: This option sets the character encoding of the filenames-
if using Central European fonts you will need to change from Western
European to Central European mode.
● Repeat mode:This option allows you to set the play repeat mode. There
are four available options: Off, One, Folder, and All.
-Off: turns off the repeat mode.
-One: repeats the file that is currently playing.
-Folder: repeats the folder that is currently playing.
-All: repeatedly plays all of the files inside the storage medium.
Advanced use