SONIQ H10 - Manual (Page 7)

System Connection System Connection
12 11
①.Plug the storage card to a card reader.
②.Plug the card reader to the USB socket in the front panel. “ ”
(3).Compatible for Storage Card
H10
◆ Card Reader and USB cable are not attached with the machine.
◆ The machine will be at waiting state after recognizing the USB storage device. Press the
play key,and it will start playing.
Note :
3. Computer Connection
① .Plug the B end of USB cable to“PC-DAC”USB socket in the rear panel. Plug the A end of
USB cable to the computer USB socket. Press“SELECTOR”or“PC-DAC”on the remote
control, the sound source will switch to“PC-DAC”state.
②.Computer will recognize the USB sound card and use it as audio device.
③.Use USB cable with USB1.1 and USB 2.0 specification.
④.If the computer operation system is Windows 7/Vista/XP/2000 or Mac OS X, it can start the
device driver of the USB sound card.
⑤.Cut off the connection of the machine and computer if you don't use the PC-DAC function for
an extended period of time.
4. Other Audio Devices Connection
①.Other audio devices (DVD/CD/cell phone) can be connected to the AUX socket by audio
signal cable. It will become wonderful HI-FI audio system. “ ”
OFF
ON
TI.6AL 250V PC-DAC
L+
L-
R+
R-
L
R
FM ANT
AUX IN SPEAKER
OFF
ON
TI.6AL 250V PC-DAC
L+
L-
R+
R-
L
R
FM ANT
AUX IN SPEAKER