SONIQ IV220T - Manual (Page 23)

- 23 -
CD / DVD OPERATION
PLAYING A DISC
1. Press the / I button to turn on the unit.
2. Press the FUNCTION button repeatedly to select DVD mode or directly to press DVD button on the remote.
See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 3.
3. Press the button to open the disc door.
4. Hold the disc by its edge and gently push it onto the spindle with label side facing outwards until hear a
“click”.
5. Push the disc door gently to close it.
It takes a short while for your unit to load the disc. After loading, the unit will automatically either bring
you to the main menu of DVD, or start playing the DVD. If the unit does not automatically start playing the
DVD, press the PLAY button.
PLAYING A PICTURE FILE DISC
This unit can play JPG files recorded on CD-R and CD-RW discs.
1. Press the button to open the disc door.
2. Hold the disc by its edge and gently push it onto the spindle with label side facing outwards until hear a
“click”.
3. Push the door gently to close it. The picture files on the disc will be displayed one by one automatically.
4. Press the STOP button to go to the folder list.
5. Press the or button to highlight a file to play. Press the PLAY button to start playback.
NOTE
• You can press the PAUSE button to interrupt playback, and press the PLAY button to resume
playback.
• You also can use the numbered buttons to enter the image number to quickly select any image.
• Press the ANGLE button on the remote control to rotate the picture orientation by 90°.
PAUSING PLAYBACK (STILL MODE)
Press the PAUSE button. To resume normal playback, press the PLAY button. Each time you press
the PAUSE button, the picture advances one frame.
STOPPING PLAYBACK
Press the STOP button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the PLAY button.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button
will reset the disc to the beginning.
SKIPPING TO A DIFFERENT TRACK
• Press the PREV button to go back to previous titles/chapters/tracks.
• Press the NEXT button to advance titles/chapters/tracks.
• For an Audio CD, use the number buttons (remote control only) to jump directly to that track number.
This owner’s manual explains the basic instructions of this unit. Some DVDs are produced to
limit operation during playback. For example, many DVDs do not allow users to skip govern-
ment warnings, or in some cases previews or other features. This is not a defect in the unit.
Refer to the instruction notes of discs.
“ ” may appear on the screen during operation. A “ ” means that the desired operation is not
permitted by the unit or disc.