Introduction – SONIQ IV220T User Manual
Page 6
- 6 -
Package Contents
Main Unit
Quick Start Guide
Warranty Card
Remote Control
AAA Batteries (x2)
INTRODUCTION
Introduction
Thank you for purchasing the unit. Your unit will bring you years of high-quality viewing
enjoyment. The television is easy to operate and provides exceptionally high quality image. The
manual will explain the operation of the unit, including its functions features and other important
features. Before installing or operating your unit, please take the time to thoroughly read this
manual, particularly the sections on safety.
Instruction Manual
iV220T
DVD
VIDEO OUT
Wall
Antenna
Socket
Outdoor Antenna
(VHF, UHF)
RF Coaxial
Wire
(75 ohm)
Quick Reference
Quick Reference
Thank you for purchasing the unit. Your unit integrated digital and analog tuner in the same unit.
You can enjoy both digital and analog broadcasting under following set-up easily.
The latest news, software, utility, driver, product, manual and Q&A will be found at SONIQ
website http://www.soniqav.com.
Antenna Connection
Your unit already pre-install a loop through cable. You simply connect outdoor antenna to DTV
antenna input to receive broadcasting signals.
You can enjoy both analog and digital TV broadcasting now by switching to TV and DTV mode.
For detail operation, you can refer to Instruction manual.
810-712295W030
Turning the unit on for the first time
The first time you turn the unit on, it will go straight into Auto scan mode. Simply follow the screen
prompts as below to tune in the channels.
1. Use the / button to select the screen menu language you prefer.
2. Use the button to move to Auto Tuning, press the
ENTER•OK button to enter Auto Tuning
menu.
3. Use the button to move to Start. Press the
ENTER•OK button confirm Start. The system will
automatically start to scan and preset all available programmes.
4. After scanning has finished, the TV will display the first programmes stored.
Language
Time Zone
Auto Tuning
English
Victoria GMT + 10
Language
Time Zone
Auto Tuning
Australia
English
Victoria GMT + 10
Power on the unit
Connecting the power cord to AC wall outlet. Press the /
I button at the unit or STANDBY/
ON button on the remote control. Press the FUNCTION button to select the desired mode
(DTV, TV, AV, DVD, iPod, PC or HDMI).
Note:
When the unit is not going to be used for a long time, disconnect the power cord
from AC wall outlet.