SONIQ LCDTV15 - Manual (Page 10)

FUNCTIONS & FEATURES
1. Power On
Plug in the supply cord, and press the MAIN POWER SWITCH on the front of the TV to turn the power on.
The red indicator light on the TV will come on and channel menu will appear on the right upper corner.
2.Switch off
Press POWER on the front of the TV to switch it off. The red indicator light on the TV will turn off and the
menu will disappear.
3. Auto Off
If the TV is ON, and there is no signal is coming into the TV set without any operation for 10 minutes, the TV
will turn off.
4. Sound Mode Selection
You can use the SOUND button on the remote to select the most suitable sound from the four modes which
are preset in factory.
5. Picture Mode Selection
You can use the PICTURE button on the remote to select the most suitable picture from the four modes which
are preset in factory.
6.TV Tuner Mode
To view the information of the current TV frequency, press DISPLAY.
7. AV Mode
To view the information of the current AV input, press DISPLAY.
8. Channel Selection
In TV mode, press CH+/ CH- to skip to the next/ previous channel, or use the numbers on the remote control
to select a channel directly.
9. Adjusting the Volume
To adjust the volume, press the VOL+/- button on the remote and on the front panel of the unit as well.
10.Muting the Volume
To mute the volume, press the MUTE button, press it again or press VOL +/- to restore the volume.
Don ' t be too-quick or too-often pressing the buttons on the panel or remote for that will shorten the life length
of the parts of the unit.
9
General Function
!
9
Instruction Manual