SONIQ LCDTV15 - Manual (Page 13)

Check the following guide for a possible correction to a problem before contacting customer service .
Symptoms C o r r e c t i o n
No power, no picture,
no sound
Picture color is not
g o o d
Picture is poor or with
stripes on it
TV channel not received
Remote control
doesn't operate.
Make sure the AC adapter is properly connected.
Make sure the mode is set correctly: T V, Video, S-Video or Scart?
Make sure the main power switch of the main unit is on.
Check color adjustment. (PA L or SECAM mode)
Verify the saturation is at an appropriate level (Maybe it was set to minimum)
Check if there is any interference from other electric appliance or strong
magnetic field.
Verify the antenna lead wire is in working condition.
Bad reception can be considered.
Make sure the T V / AV setting is correct.
Check if the Skip function is set, if it do, unskip it by the menu.
Batteries may be weak. Replace batteries.
Make sure nothing is in between the remote and the remote sensor.
Make sure the remote sensor of the unit is not exposed to strong beam.
Check if the poparity is correct in the direction, and be in good connection.
TROUBLESHOOTING GUIDE
There are a few color
spots on the screen
The LCD monitor is specified with high-resolution Liquid Crystal Display.
Because of some specific feature, there are a few color spots on the screen,
t h a t 's not a fault. We will make sure it is in compliance wtih the evaluation
s t a n d a r d .
LCDTV15
12
LCDTV15/A