SONIQ LCDTV20 - Manual (Page 10)

LCDTV20 USER MANUAL
.9.
FUNCTIONS & FEATURES
General Function
1.Turn “On/OFF” unit
Connect AC/DC adaptor into unit (DC SUPPLY INPUT), before plug in AC wallet. STANDBY indicator on
front panel will be “ON” in RED color, unit getting standby mode automatically.Press STANDBY button on
Unit/Remote Control, unit will be “ON”, STANDBY indicator will be changed from RED to GREEN color.
Press STANDBY button again, unit will be “Off”, STANDBY indicator change from GREEN to RED color.
(Notes: STANDBY LED will remain in RED, if there is no signal input when unit is ON.)
(Notes: Disconnect AC Plug from AC Wallet, if it’s not used for a long period.)
2.Auto Off
“AUTO OFF” function will be activated when there is no signal input for 10 minutes. Unit could be
resumed after pressed STANDBY button.
3.Sound Mode Selection
Press SOUND button on Remote control get different sound effects (Music, Speech, Normal,User Define).
4.Image effect
Press PICTURE button on Remote control to get different image effects (Soft, Vivid, Normal,User Define).
5.Display Button
Press DISPLAY button on Remote control to view the current desired TV channel number or AV mode
6.Channel Selection
Press “CH+” or “CH-” button find a desired TV channel.
7. Volume Adjustment
Press “VOL+” or VOL-” button to adjust the sound output level.
8.Mute Function
Press MUTE button on Remote control to mute the sound; press “VOL+” or VOL-” button to release the
Mute function.
**Abnormal quick or often press buttons will be shorten the life of the parts.