SONIQ LCDTV20 User Manual
Page 9
LCDTV20
.8.
USER MANUAL
CONNECTING TOTHE ANTENNA
Parallel flat:cable
(300 Ω)
Impedance adapter
(300Ω-75Ω)
Coaxial cable
(75Ω)
RF Input
Notes:
* Connect the outdoor antenna as shown above, and also install a lightning arrester and perform periodical
checking and repair.
* It is suggested to better use a 75 Ω coaxial cable, to eliminate interference or noise due to improper
matching of impedance.
*The cable must not be tied together with supply cord.
CONNECTING TOTHE AC ADAPTER
An AC adapter is supplied with the TV, to transform AC 110V-240V to DC 12V.To power on the TV set, you
should first connect the adapter to the rear of the TV and the other end to the main power.
* Notes:Disconnect AC plug from wallet when unused for a long time.
To ensure best receiving effect, use outdoor antenna or cable antenna (CATV).The type and location of
antennas shallvary with places.