SONIQ MB10 - Manual (Page 7)

SPECIFICATIONS CARE AND MAINTENANCE
To clean the MB10 Micro System
• Ensure the unit is powered off and unplugged from any electrical outlet.
• Wipe the case with a slightly moist, lint-fere cloth.
• Do not use any cleanser containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the radio.
• Do not allow liquids to spill or objects to drop into any openings.
• Always use original packaging if it is necessary to transport the unit.
If this unit is used in a dusty environment, it may be necessary to have
the unit serviced at your local dealer periodically.
It is not advisable to allow large deposits of dust to accumulate within
the unit as it may prevent adequate cooling. Similarly dust deposits
which become damp can sometimes lead to electrical problems may
cause severe damage to the delicate electronics within this unit.
11 12
Care and Maintenance Specification
CONNECTING EXTERNAL AUDIO SOURCES
External audio sources such as non iPod Mp3 players can be
connected using a 3.5mm to RCA audio (not supplied).
1. Connect one end of the cable to the Mp3 players headphone/ line
output and the other end to the AUX IN input on the back of the unit.
2. Press the FUNCTION button repeatedly until you reach the AUX-IN
option or press the AUX-IN button on the remote control.
3. Adjust the volume.
NOTE: The volume output is effected by the volume level on the
source when using a headphone output ie: Mp3 player. So make
sure the volume is set to about 70-80% (not too loud to avoid
distortion).
Power supply can not be turned on
Make sure that the power cord is fully inserted in the power outlet.
The remote control does not work
No sound
The unit does not work at all
The embedded microcomputer may have failed because of a lightning
strike, static, or other interference.
Input voltage:
Max. power consumption:
Inputs:
220-240V~50Hz
100W
USB - USB device
AUDIO - Audio input connection(2×RCA)
- Coaxial input 1,2
- Optical 1,2
Ant - FM aerial connection
Remote control batteries: 2×AAA/LR03
Note: Specifications subject to change without prior notice. Weight and
dimensions are approximate.
Tuner frequency range: FM 87.50 - 108.00MHz
Battery is used up
The front end of the remote control is not aimed at the infrared reception
part of the player.
Make sure that the audio cable is connected correctly and securely to the
back of your unit and to the sound system.
Make sure that the sound system is set to the correct audio input.
Turn your unit off, then back on.
Trouble Shooting