SONIQ MB205 - Manual (Page 4)

A. Automatical radio station search and storage: Press “ ” key for more
than 3 seconds on the unit to automatically search for FM radio stations
in frequency ranges from 87.5 to 108.0MHz and store each stations in
turn. After the channel search has been completed the radio mode will
automatically skip to stored stations. If you press “ ” key shortly
during the auto search, it will automatically stop the search and return
to “CH1 ” Channel.(Up to 20 radio stations can be stored in memory).
B. “ ” key indicator lamp will flicker during the auto radio station search
of the unit, and “ ” will remain ON after the auto radio station search.
C. To change radio stations from memory: Press “ ” or “ ” key
shortly on the unit to select.
Bluetooth Search Mode:
Press key shortly in any states to switch to the Bluetooth function.
1．Press “ ” key for more than 3 seconds in the Bluetooth search mode
the blue indicator LED lamp will flicker indicating paring mode.
2．Put the the device to be paired within 3 meters;
3．Activate the Bluetooth features of the mobile devices so that it starts to
search for the Bluetooth device. Please refer to the users’ manual of
mobile phone for details;
4．Select “MB205” from bluetooth discovered list.
5．Some devices will request an identification code, Key “0000” and press
ENTER key to pair the speaker to the mobile device, after successful
pairing, the blue LED indicator lamp will remain ON.
6．Select music to be played from the mobile device and select play. Music
will be transferred to the Bluetooth speaker. For best performance
ensure path between mobile device and speaker is free from obstacles
and keep within a 10 metre distance.
Remarks:
The unit will access to the connection mode after the successful pair.
The speaker will remember 4 paired devices. When the paired device
exceeds 4, the speaker will automatically clear the first remembered from
its memory.
Bluetooth Connection Mode:
After the successful pair, the blue LED indicator lamp will remain ON. When
there is no Bluetooth icon on the cell phone screen, please activate the
Bluetooth connection as per the following steps:
(1) Use the mobile device to select “MB205” in the cell phone pair list for
connection;
(2) Select “Accept to connect” on the mobile device screen.
(3) To disconnect, long press “ ” key or disconnect from the mobile
device the speaker will enter into Bluetooth standby mode.
5V/1.0A ;5V/2.1A output charge:
In any state after power on, you can insert MINI USB or MICOR USB line
into 5V/1A or 5V/2.1A output charge jack on the back shell of the unit to
connect to various kinds of cell phones and equipment for charge.
Remarks:
Once power adapter has been connected and the unit is “ON”, use USB
cable to charge your mobile device (Smartphone or Tablet). The 5V/1.0A
or 5V/2.1A output charge jacks can be found on the back shell of the
speaker.
Note: Only one device can be charged at a time. 2 Ports will not charge
simultaneously.
Instructions for Operation Bluetooth Search Mode