SONIQ MB205 - Manual (Page 5)

Power-off:
Press “ ” key shortly in any functions to put the unit into standby mode.
Note: Speaker will automatically enter standby mode if inactive for five
minutes except in FM mode.
7. Equipment Compatibility
The speaker supports most popular Smartphones and Tablets with Bluetooth
that have Bluetooth function.
8. Main Technical Parameters
Bluetooth specifications : Bluetooth V2.1+EDR
Output power : Output Level 2, maximum connection distance of 10 meters
Maximum output power : L: 4.8W + R: 4.8W; SW: 12W
Working frequency range : 2.402GHz - 2.480GHz
Profiles supported : HSP, HFP 1.5, A2DP and AVRCP Profiles
Speaker impedance : Full frequency: L and R: 4Ω (Ohm); bass: 6Ω (Ohm)
Product dimensions : 310Ч 180Ч 100 (mm) (L x W x H)
Product Weight : Approximately 3.271KG (host)
The product design and specifications may be changed without prior notice!
9. Guidance on Simple Troubleshooting
Bluetooth Connection Mode Equipment Compatibility
Failure Resolutions
Bluetooth pairing
and connection
failure Another mobile device is connected; or has been
previously connected and has the Bluetooth mode
turned on.
Turn off other Bluetooth devices so they do
not automatically connect to the speaker.
The indicator
lamp does not
turn on and the
Bluetooth unit is
not available Speaker has not been activated in a long time and
in dormant mode. Long press the PAIR/Play button
to activate the unit.
1. After the Mobile device and Speaker are
connected, the Bluetooth unit volume is not working
at the maximum level; increase output volume level
on the mobile device.
2. Speaker has low output volume. Long press
key to increase volume. Low Bluetooth
volume
Short Bluetooth
connection
distance There is a barrier between the mobile device and
the Bluetooth Speaker; clear the path of field.
Bluetooth may be
normally
connected and
played, but
sometimes, it is
interrupted Bluetooth connection interruption
1. There is a barrier between the mobile device and
the Bluetooth Speaker. Clear the field path.
2. The distance between the Bluetooth Speaker and
connected mobile device is too great and out of
normal connection range; ensure they are within
10 metres.
No sound after
Bluetooth is
connected The audio feature of Bluetooth Speaker is not
activated after it is connected to the mobile device;
turn on the output volume of mobile device.
Bluetooth cannot
be connected to
other mobile
devices and
equipment Bluetooth unit has been connected to the current
cell phone; to pair with and connect to the next cell
phone, please press the PAIR button on the
speaker for a longer time to disconnect the last
mobile device and click “CONNECT” after the next
mocile device has searched the Bluetooth pair name.