SONIQ MB402 - Manual (Page 3)

Top View
1
Press this button to adjust volume level down.
2.+ Button
Press this button to adjust volume level up
3. Button
·Press this button once to return to the beginning of current track or
previous track.
4
. Button
Press this button once to advance to the next track.
5. Power On/Standby Button
6
. Battery charging Indicator (Red color)
·Rapid flashing =low battery
While charging :
·Flashing =charging
·Steady Red= full charged
Operating mode indicator (Blue/Green)
Blue color =Bluetooth mode
Green=Aux-in mode
7
.Built-in Microphone
8. Button
While unit is in Bluetooth Playback mode, press once to play or
pause the current track.
In Bluetooth mode, when receiving an incoming call on your cell phone,
tap this button once to answer the phone, press this button again or
press and hold this button to end the call or ignore the incoming call.
9. Mini USB Charging jack
10. Aux-In Jack
11. USB port (for charging external devices only)
.-Button
LOCATION OF CONTROLS
This unit operates on a built-in Li-ion battery that can be recharged either using the USB port on
your computer or from a USB power adaptor (not included) with a rated output of DC 5V 500mA
and up.
Note: The mini USB CHARGING JACK located on this unit is only designed for charging the
built-in Li-ion battery.
CHARGING THE BATTERY FOR FIRST TIME
1. Charge the built-in Li-ion battery a minimum of 4 hours prior to first use.
Plug the unit into the USB port on your computer or into a USB power adaptor (not included)
using the included USB cable.
2. The battery charging indicator flashes while charging and it stops flashing when the unit is
fully charged.
Unplug the USB cable from the power source once the battery is fully charged.
RECHARGING THE INTERNAL BATTERY
After prolonged use, the internal battery will become weak and the operation may become
intermittent. When the internal battery capacity is very low, the battery Indicator will rapidly
flash in red to alert you to recharge the internal battery as soon as possible.
Plug the speaker into a USB port on your computer by using the included USB cable or into
a DC 5V, 500mA and up USB power adaptor (not included). Disconnect the USB cable from
the speaker as soon as it is fully charged.
Notes:
1.Charging time will vary if you are listening to music while charging the internal battery.
We recommend you switch off the speaker power during the charging process.
2. To prolong the life of a rechargeable battery, it is recommended to completely discharge
it before fully charging it again.
3.Rechargeable batteries need to be cycled for maximum performance and longer battery
life. If you don't use the player that often, be sure to recharge the battery at least once a
month in order to keep the internal battery working properly.
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
Li-ion batteries must be recycled. Do not dispose of in the trash.
Use only chargers rated for Li-ion cells. Be sure the charger's voltage and current settings are
correct for the battery pack being charged.
Charge batteries on a fireproof surface and away from flammable items or liquids. Batteries
should NEVER be left unattended while charging. Only adults should charge the batteries.
Unplug the charger when the battery is charged or not in use.
Note: The speaker is not magnetically shielded and may cause color distortion on the screen
of some TVs or video monitors. To avoid this, you may need to move the unit further away from
the TV or monitor if an unnatural color shifts or image distortion occurs.
TURN THE SPEAKER POWER ON/OFF
1.Press the Power ON/OFF button on the top of the unit to turn the unit on,a voice prompt
“Power on” and a beep sound is heard in 2-3 seconds. Meanwhile, the Operating mode
indicator will flash in blue.
2.Press the Power ON/OFF button again to turn the unit off.
BATTERY CHARGING INSTRUCTION
BATTERY CHARGING INSTRUCTION