SONIQ MB402 - Manual (Page 4)

OPERATING THE SPEAKER IN BLUETOOTH MODE
Bluetooth involves a technology for wireless radio connection of devices over a short distance.
Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz in the ISM band
(Industrial, Scientific and Medical). Interference can be caused, for example by WLAN-networks,
DAB radios, cordless phones, or microwave ovens which work on the same frequency band.
This speaker offers you the possibility to use a Bluetooth enabled device. The functional radius
is limited to approx.10 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and has
a music-player function, then you can also wirelessly transfer music to the device. The A2DP
profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals are wirelessly
transferred between the playing device (source) and the receiving device.
Due to the different device manufacturers, models, and software versions, a full functionality
cannot be guaranteed.
Pairing (Linking) A Bluetooth Enabled Cell Phone Or Other Bluetooth Enabled Device To
The Speaker
If the speaker has never been paired with a Bluetooth device before . You need to follow the
pairing instructions below to link the speaker with your Bluetooth device .
1.When the speaker turned on, the Operating mode Indicator flashes in blue. The speaker is
ready to pair (link) with your Bluetooth device .
2.Activate Bluetooth on the compatible device, and set it to search for compatible devices.
3.Select the speaker name:”MB402” from the list of found devices.
Tips: Only one playback unit can be connected to the speaker. If the speaker is already connected
to another playback unit, the speaker will not appear in the BT selection list.
4. If your device asks for a passkey (depending on the device manufacturers, model, and software
version), then enter digits “0000”(four zeros) and press OK.
If pairing has been carried out successfully, a voice prompt “Pairing completed” and a beep sound
is heard, meanwhile, the Blue color indicator stops flashing.
If the speaker has ever been paired with a Bluetooth device before. You need to follow the
pairing instructions below to link the speaker with your Bluetooth device .
1.After turning on the speaker, the speaker will search for the last paired device . The operating
mode indicator will flash in blue. If the unit finds the paired Bluetooth device , a beep sound is
heard and operating mode indicator will keep in blue and stop flashing .
2.After successfully pairing (linking) , you can begin playing music from your Bluetooth device
wirelessly to the speaker.
3.Press the + / - button on the speaker to adjust to the desired volume level.
Using The Speaker as a Handfree Bluetooth Speakerphone
1.Link your cell phone to the speaker via Bluetooth as described above.
2.When receiving an incoming call on your cell phone , tap.
3.Adjust the volume control of your cell phone to obtain the desired sound level.
4.To endthe call, just tap the button again, a short beep sound will be heard and the call will end.
If you were playing music from your cell phone to the speaker before answering the call, the music
will automatically resume playingwhen you hang up.
5.To ignore an incoming call, simply press and hold the button on the speaker for about 2 seconds,
a beep sound will be heard and the call will be ignored.
·
·
·
OPERATING THE SPEAKER IN BLUETOOTH MODE
If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect this
unit via bluetooth directly, you can still play it on the speaker via an audio connecting cable.
1.Plug one end of the 3.5mm audio cable (included) into the headphone or line out jack on
your player, plug the other end of cable into the unit AUX-IN jack of the speaker.
2.Turn on the external audio source and play your device.
3.Press the Power ON/OFF button to turn on the unit, the operating mode indicator will light
up in Green.
4.The volume level can now be controlled through the main unit. Operate all other functions
on the external device as usual.
Notes:
1. If you're connected to the Line out Jack of your external device, then you only need to
adjust the volume control of this speaker. If you're connected to the Headphone Jack of your
external device, then you may need to adjust both the volume control of your external device
and the volume control of this unit to find the most desirable volume setting.
2. Press the Power ON/OFF button to turn off the unit when you finish listening.
Don't forget to switch off the power of your external device as well.
Fault Cause Solution
No Charging
The USB power adaptor
(not included) is not
plugged into a wall outlet
or the USB cable
(included)is not plugged
into the mini USB jack on
the MB402 Plug the USB power adaptor
(not included) into a wall
outlet and plug the USB
cable (included) into the
mini USB jack on the
MB402
Wall outlet is not
functioning.
Plug another device into
the same outlet to confirm
the outlet is working.
Computer USB port is
not function.
Make sure your computer
power is turned on and try
another USB port.
Troubleshooting Guide
OPERATING THE SPEAKER IN AUX-IN MODE
OPERATING THE SPEAKER IN AUX-IN MODE