SONIQ PD70 - Manual (Page 10)

-10-
Language Setup
1. Press the MENU button in stop mode (when disc is not
playing).
2. Press the button to select Language Menu.
3. Press the / button to select the option (Player Menu,
Audio, Subtitle or Disc Menu), then press the button.
4. Press the / button to select your preferred language,
then press the button to confirm.
5. Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6. Press the MENU button to exit the menu.
Notes:
• Some DVDs may not play in the audio language you selected. A prior language may be programmed
on the disc.
• Some DVDs may be set to display subtitles in a language other than the one you selected. A prior
subtitle language may be programmed on the disc.
• Some DVDs allow you to change subtitle selections using the disc menu only. If this is the case, press
the MENU button and choose the appropriate subtitle language from the selection on the disc menu.
• Some DVDs may not include your pre-selected language. In this case, the DVD player automatically
displays disc menus consistent with the disc's initial language setting.
Go To Language Menu
- - Language Menu - -
Syste m Language Video
Player Menu
Audi o
Subtitle
Disc Menu Eng
Eng
Of f
Eng
Video Setup
1. Press the MENU button in stop mode (when disc is not playing).
2. Press the / button to select Video Menu.
3. Press the / button to select the option (Brightness or
Contrast), then press the button.
4. Press the / button to adjust the setting, then press the
button to confirm.
5. Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6. Press the MENU button to exit the menu.
Brightnes s
Contrast
Go To Video Menu
- - Video Menu - -
Language
00
00
System Video
This unit can play JPEG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommended).
Viewing JPEG Files
1. Use your fingers to hold the disc door on the front of the
unit and lift it up to open.
2. Hold a JPEG file disc by its edges and gently push it onto the
spindle with the label side facing up until you hear a “click”.
3. Close the disc door. The JPEG files on the disc will be
displayed one by one automatically. If the disc does not
play automatically, press the button.
4. Press the STOP button to display a folder list. Press the
/ button to highlight a JPEG file to play. Press the button to start playback.
Notes:
• You can press the button to freeze the picture. Press the button again to resume picture slide show.
• You can press the STOP button to quit playback.
• You can hold the PREV or NEXT button to change the picture file.
• Some discs may not permit this operation.
00:00 00:00
001/035
\
DSCN0281
DSCN0282
DSCN0283
DSCN0284
DSCN0285
DSCN0286
Viewing JPEG Files
Customizing the Function Settings