SONIQ QMD78DS - Manual (Page 18)

- 17 -
This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommendable).
Viewing JPG Files
1. Open the disc door.
2. Hold a JPG file disc by its edge and gently push it onto the spindle with the label
side facing up until you hear a “click”.
3. Close the disc door. A list of folders/files will appear on the screen.
4. Press the or button to select your desired file, the selected picture will
appear at the lower right corner. Press the PLAY button to start playback.
Press the STOP button to display a folder list.
Note:
• You can press the
PAUSE button to interrupt playback. Press the PLAY button to resume playback.
• You can press the STOP button to quit playback.
• You can press the PREV or NEXT button to change the picture.
• You can press the ANGLE button to rotate direction of the picture by 90°.
• Some discs may not permit this operation.
• Some files will take longer time to display, it depends on the file format and size.
When play CD / JPG discs, you can modify the Play Modes through the Toolkit which appears on the right of
below picture on the screen. Press the / button to navigate between the windows and the / button to
select files/tracks or play mode items. Then press the
ENTER button.
1. In Stop mode, press the Cursor buttons ( , , , ) to select "Edit mode" then press the ENTER button.
2. Use the Cursor buttons ( , , , ) to select tracks/files shown on the left hand side of the window. Press
the ENTER button to confirm the selected tracks/files. " " will appear in front of the selected tracks/files.
3. Select "Add to program", then press the ENTER button. " " will disappear from the screen. It means that
the tracks/files you have selected are added into the "Program view".
4. Select "Program view" to view programmed files. To add more files by "Browser view" follow above steps.
5. Press the
PLAY button to start the program playback.
The Toolkit has the following play mode items:
•
Repeat ( Off / Single / All ):
Off: Resumes normal playback.
Single: Repeats the current track/file.
All: Repeats all files on the current folder or all tracks on the disc.
•
Mode ( Normal / Shuffle / Music intro ):
Normal: Resumes normal playback.
Shuffle: Playbacks track/file in random order.
Music intro (for Audio CD only): Only playbacks the first 10 seconds of all the tracks on the current folder/
disc.
• Edit mode: Program operation works only when "Edit mode" is selected.
• Program view: To view tracks/files in the "Program view" list. It is disabled when the "Program view" list is
empty.
• Add to program: Add files/tracks to the "Program view" list. It is disabled if the "Edit mode" is not selected.
• Browser view: To view files/tracks in the original view list.
• Clear program: Delete the files/tracks in the "Program view" list.
Select a file/track or more you want to delete in complete stop mode (press the STOP button twice). "
" will appear beside the deleted file/track. Select "Clear program" and then press the ENTER button. It is
disabled if the "Edit mode" is not selected.
Note: The program will be deleted if the STOP button is pressed twice, the disc door is opened, or selected
files are deleted by selecting "Clear program".
Play Modes for CD or JPG disc
Viewing JPG files