Remote control – SONIQ QMD78DS User Manual

Page 6

Advertising
background image

- 5 -

Using the Remote Control

• Point the remote control at the

REMOTE SENSOR located on
the unit.

• When there is a strong ambient

light source, the perform-
ance of the infrared REMOTE
SENSOR may be degraded,
causing unreliable operation.

• The recommended effective

distance for remote operation
is about 16 feet (5 meters).

To Change Remote Battery

1. Open the battery door.

Take out the PVC sheet before
operating the Remote Control.

2. Insert one CR2025 (3V) size

battery.

WARNING:

• Do not dispose of the battery in

fire or it may explode or leak.

• Batteries shall not be exposed

to excessive heat such as
sunshine, fire or the like.

CAUTION:

Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type.

1) VIDEO MODE button

Adjusts Brightness, Contrast or
Colour of the LCD screen.

2) PREV button

Moves back through titles,
chapters or tracks on a disc.

3) / SEARCH buttons

SEARCH: Fast reverse
playback.

SEARCH: Fast forward
playback.

4) GOTO button

Skips directly to a location on a
DVD.

5) Cursor ( , , , ) buttons

Use to move between selections
on a menu screen and adjust
certain settings.

ENTER button

Confirms selections on a menu
screen.

6) MEMORY button

In STOP mode, sets titles/
chapters in a favourite order.

7) Number (0 - 9) buttons

Use when creating programs,
entering

parental

control

password or locating a title/
chapter/track or specific time.

8) REPEAT A-B button

Performs point-to-point repeat

playback on a DVD or CD.

REPEAT DISC button

Repeats a DVD chapter or title.

Repeats a CD track or the entire
disc.

SETUP button

When a DVD is stopped, brings
up the unit’s SETUP menu.

9) SUBTITLE button

Selects one of the subtitle
languages programmed on a
DVD (if available).

RETURN button

Returns to normal operation
after using the SETUP menu of
a DVD.

10) AUDIO button

Selects one of the audio sound
tracks on a DVD (if more than
one is available) or select the
audio output mode on a CD.

11) ANGLE button

Switches

between

multiple

camera angles when the DVD
you are playing has been
programmed

with

multiple

camera angles.

12) DISPLAY button

Shows status information on the
screen.

13) STOP button

Stops playing a disc.

PLAY button

Starts or resumes playback of a
disc.

PAUSE button

Pause playback and frame
advance.

14)

NEXT button

Moves forward through titles,
chapters or tracks on a disc.

15) MENU button

Enters and exits the main DVD
menu.

Battery Replacement

When the battery becomes weak,
the operating distance of the remote
control will be greatly reduced
and you will need to replace the
battery.
Note :
• If the remote control is not

going to be used for a long time,
remove the battery to avoid
damage caused by battery
leakage corrosion.

• Corrosion, oxidation, battery-

leakage and any other gradually
acidic defect of this nature will
void the warranty.

• When

discarding

batteries,

environmental problems must
be considered and local rules or
laws governing the disposal of
these batteries must be strictly
followed.

Remote Control

Advertising