Using the remote controller, Using the ac adapter, Connecting to a car adapter – SONIQ QMD90B User Manual

Page 5

Advertising
background image

Position the remote controller at a distance NO FARTHER THAN 7m away from and at an angle of 60 in relation to the remote sensor.

The operating range of this remote controller may vary according to the brightness of the room.
Avoid bright light (sunshine or artificial light) aiming directly at the remote sensor. This may cause the remote controller not to work
properly.
Do not block the remote controller from the remote sensor by solid objects placed between them.
Use of this remote controller while operating the remote controller of another appliance is not recommended as such operation may
cause the remote controller not to work reliably.

o

NOTE:

REMOTE SENSOR

30

7 m

30

4

USING THE REMOTE CONTROLLER:

INFRARED EMITTER OF REMOTE CONTROLLER

Another note:

Uninstall the battery when the player is not to be used for a long period of time to prevent battery from leaking, which may result in harm.

To power
outlet

USING THE AC ADAPTER:

Always turn off the DVD player via the Power on/off Key prior to connecting or disconnecting the AC ADAPTER.

Be sure to use the supplied AC adapter. Using a different type of adapter may cause malfunction or damage to the product.
When the AC adapter is used for prolonged periods of time, it may heat up. This is normal and is not a cause for concern.
When not using the adapter, unplug it from the wall outlet.
Keep the AC adapter free from moisture, cold, and dust. Otherwise, a risk of fire or electric shock may be resulted in.

WARNINGS:

Only use the AC adapter supplied with this player.
Be sure to unwind the AC adapter cable (DC output cable) before using, as electromagnetic interference may cause problems

with

other devices.
Always turn off the DVD player when inserting or removing the AC adapter.
Before storing the battery pack, make sure it is completely drained.
Be sure to recharge the battery at least once every six months to ensure proper battery life.

Connecting to a car adapter

The 9V car power adapter is designed for use with vehicles that have a 12V, negative ground electrical system.

To the cigarette lighter socket

WARNING:
Disconnect the car power adapter when not in use. Not in use in 24V vehicles.

CAUTIONS:

! Use the unit only with 9V car power adapter, use with other car power adapter could damage the unit.

!

!

!

!

!

The recommended 9V car power adapter is for use with this unit only. Do not use it with other equipment.
In the interests of road traffic safety, do not operate the unit or view video software while driving a vehicle.
Make sure the unit is fastened securely to prevent from moving about inside the vehicle in the event of an accident
When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become hot due to poor contact.
Be sure to clean the cigarette lighter socket before use.
After use, disconnect the 9V car power adapter from both the unit and cigarette lighter socket.

FUSE REPLACEMENT

FUSE

Advertising