SONIQ QMD93B - Manual (Page 20)

-19-
Carrying Bag Installation
CAUTION:
Using other car power adaptors could damage
the unit.
SAFETY WARNING!
On no account should this unit be used
by the driver of a moving motor vehicle,
or left unsecured in the vehicle whilst
driving.
If this unit is being used by a passenger
in your vehicle, be sure that it is secured
or held safely, and does not obstruct any
safety device (i.e. airbag, seat belt etc.)
that is fitted.
CARRYING BAG
1. Insert the unit into bag as shown. 2. Insert the straps on carrying bag as shown.
3. Strap the top strap around the car's headrest support
(ie. just below the headrest) as shown below.
4. Strap the lower strap around the car seat itself, as
shown below.
5. Adjust the straps tightly so that the unit is secured.
And connect the 12V car power adaptor as shown.