SONIQ QMS100 - Manual (Page 2)

1
23
22 21
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
16 17 18 19 20
1. POWER/AL.RESET button
2. SLEEP button
3. DISP button
4. VOLUME JOG CONTROL/EQ
SET button
5.
PLAY/BAND button ( )
6. STOP/MONO button ( )
7. LCD display
8. SNOOZE/BACKLIGHT button
9. FUNCTION button
10. BACKWARD/SCAN DN button ( )
11. FORWARD/SCAN UP button ( )
12. TUNING JOG CONTROL/REPEAT
/PROGRAM/RANDOM button
13. TRANSFER button
14. Al1 ON/OFF button
15. Al2 ON/OFF button
16. Speaker
17. LINE IN
18. SD/MMC CARD input
19. USB input
20. EARPHONE JACK
21. FM ANTENNA
22. BATTERY DOOR
23. POWER CORD
DANGEROUS VOLTAGE
Conductor dangerous voltage, that may be of sufficient magnitude
to constitute a risk of electric shock to persons is present within this
product's enclosure.
ATTENTION
The owner's manual contains important operating and maintenance
instructions, for you safety, it is necessary to refer to the manual.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO DRIPPING OR SPLASHING.
Note: This unit will become warm used for a long period of time.
This is normal and does not indicate a problem with the unit.
This player includes micro-processors which may malfunction
as a result of external electrical interference or noise. If the
player is not working properly, disconnect the power source and
them reconnect it.
This safety and operating instruction should be retained for future
reference.
Avoid installing the unit in locations described below:
- Places exposed to direct sunlight or close to heat radiating
Appliances such as electric heaters.
On top of other stereo equipment that radiate too much heat.
- Places blocking ventilation or dusty places.
- Places subject to constant vibration.
Humid or moist places.
Make sure not to obstruct the ventilation openings.
Operate turning controls and switches as instructed in the manual.
Before turning on the power for the first time, make sure the
batteries is properly installed.
For safety reasons, do not remove any covers or attempt to gain access
to the inside of the product. Refer any servicing to qualified personnel.
Do not attempt to remove any screws, or open the casing of the unit;
there are no user serviceable parts inside, refer all servicing to qualified
service personnel.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER(OR BACK),NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Notes
2