SONIQ QMS100 - Manual (Page 3)

1 : indicates when RANDOM is selected in USB or SD/MMC mode
2 : indicates when select Random in SD/MMC mode if USB and SD/MMC
devices are both inserted
3 : indicates when playback USB
4 : indicates when playback SD/MMC
5 : indicates when the time is PM(12 hour mode)
6 : show clock : hour digit
7 : show clock : minute digit
8 : indicates radio memory/ program mode
9 : indicates USB or SD/MMC program mode
10 : indicates radio memory/ program mode
11 : indicates when sleep function is selected
12 : indicates when alarm2 is set to radio mode
13 : illuminates when alarm2 is set to USB mode
14 : illuminates when alarm2 is on
15 : illuminates when alarm2 is set to weekend mode
16 : illuminates when alarm2 is set to SD/MMC mode
17 : illuminates when alarm2 is set to buzzer mode
18 : illuminates when alarm2 is on
19 : indicates when alarm2 time is PM (12 hour mode)
20 : indicates FM stereo mode (station is received in stereo)
21 : indicates FM mono mode
22 : indicates when select repeat all in USB or SD/MMC mode
23 : indicates when select repeat a album in USB or SD/MMC mode
24 : indicates when select repeat one in USB or SD/MMC mode
25 : indicates when playback MP3 format song
26 : indicates when playback WMA format song
27 : indicates when alarm1 time is PM (12 hour mode)
28 : illuminates when alarm1 is on
29 : indicates when playback SD/MMC
30 : illuminates when alarm1 is set to buzzer mode
31 : illuminates when alarm1 is set to SD/MMC mode
32 : illuminates when alarm1 is on
33 : illuminates when alarm1 is set to USB mode
34 : indicates when alarm1 is set to radio mode
35 : illuminates when alarm1 is set to weekend on mode
POWER CORD CONNECTION
Before using, connect the AC Power plug to the AC socket, then turn
on the power switch of the unit.
OPERATING THE UNIT
When you plug the unit into the AC socket firstly, the unit will be in
standby mode, the LCD will show the time and day. In standby mode
press snooze/backlight key to turn the backlight on/off.
1
2 3 4 5 6 7 8 9 10 11 12 13
14
15
16
17
18
19
20 23 24 25 26 27
28
29
31
32
33
34
35
30
22 21
3
MP3/WMA music file playback
- Press the [FUNC] key to select USB or SD/MMC mode. USB or
SD/MMC icon will be indicated individually.
- Press key to start music playback after read out the TOC. The
LCD will show the file format (Mp3 or WMA), album number, track
and playing time. Press the key again to pause playback and
the track will flash unti release pause function.
- Press key to stop music playback and the LCD will show total
album and tracks.
- Press key to up skip track select, press and hold the key to fast
forward search.
- Press key to down skip track select, press and hold the key to fast
backward search.
- Roll [Tuning bar/Program button] to select desired track.
- Press [Tuning bar/Repeat button] to select following
play mode during playback: (LCD will show in sequence as below)
Repeat 1 Repeat Album Repeat All Random
Remarks: In SD/MMC mode, the mix Random (USB+SD/MMC) will
be occurred if both device are inserted and the LCD will show (USB+
SD/MMC) icon.
- In stop mode, press [Tuning bar/Program button] to enter Program
mode (up to 32 tracks can be programmed),
press & or roll the [Tuning bar/Program button] to select track
and press the bar to confirm. When Program is complete,
press for program play.
- Remarks: Mix Programming can be selected if SD/MMC and USB
devices are both inserted. User can press [Func] key to select either USB
or SD/MMC mode during programming.
Music file transfer between SD/MMC and USB device
- Copy the current track
Press [TRANSFER] key while the track is played, and LCD will indicate as
the following sequence:
Copy complete Current Track
Track
X X X
Start Copy
Alb
X X
Confirm OK Table of Content
X X X
Track
X X
Alb
When the unit have no power but the back up battery(AA X 2), the
system will keep running but LCD show nothing. You can press the
POWER button to switch the unit ON and OFF. Pull the AC plug out
of the AC socket if you want to switch off the unit completely.
12 58
Sun.
- In SD/MMC or USB mode, press [ ] key to achieve file transfer TRANSFER
4
.