SONIQ QPC60B User Manual

Page 4

Advertising
background image

RANDOM PLAY

Random play is that tracks on the disc are played by the player at random.

Press MODE button four times to enter this mode during play, "RANDOM"

shows in the LCD. Press PLAY/PAUSE button to begin Random playback.

Tracks on the disc will be selected at random for playback and the player stops

automatically after all tracks are played. Press MODE button once more to exit

random and return to normal playback from the track it's reached.

PROGRAMMED PLAY

Programmed play is that tracks on the disc can be edited for playback in a

preferred order with the use of PROG. button.

In CD stop mode, press PROG./EQ button once, "PROG" shows in the LCD

with a flickering "000" and the program sequence indication "P-01", select the

first track to be programmed using SKIP UP/DN buttons or +10/ALBUM button,

and press PROG. button again to store and advance to the next programming

step. The program sequence indication changes to "P-02" waiting for your next

input.

Repeat the steps above to program more tracks. A maximum of 20 tracks can

be programmed in memory in a preferred order.

Press PLAY/PAUSE button to begin programmed play in the preferred order

after you are done with programming. The player stops automatically after all

programmed tracks are played.

You may press STOP button to terminate programmed playback. In program

stop mode, press STOP button again to clear the programming; press

PLAY/PAUSE button to begin the programmed playback with the programming

order identical with the previous one done.

4. Hold the SKIP UP button in music play to search at quick rate for a specific

point to play.

5. Hold the SKIP DN button in music play to search at quick rate for a specific

point to play.

To repeat a preferred track in playback, press MODE button once, "REPT 1"

shows in the LCD. Then select the preferred track using SKIP

buttons or

+10/ALBUM button. The player will repeat the chosen track until you press

STOP button.

REPEAT AN ALBUM

REPEAT ALL TRACKS

To repeat all tracks, press MODE button three times in play mode, "REPT ALL"

shows in the LCD. The player will repeat all tracks until you press STOP button.

INTRODUCTION PLAY

Introduction play is that the first ten seconds of each track are played in a

sequential order. Press MODE button four times to enter this mode during play,

"INTRO" shows in the LCD. Press PLAY/PAUSE button to begin Introduction

play from Track NO.1. Press PLAY/PAUSE button to exit Introduction play mode

and normal music play resumes. Press SKIP UP button in Introduction mode to

begin Introduction play from the next track immediately after the current track.

Press SKIP DN button in Introduction mode to begin Introduction play from the

current track.

RANDOM PLAY

Random play is that tracks on the disc are played by the player at random.

Press MODE button five times to enter this mode during play, "RANDOM"

shows in the LCD. Press PLAY/PAUSE button to begin Random playback.

Tracks on the disc will be selected at random for playback and the player stops

automatically after all tracks are played. Press MODE button once more to exit

random and return to normal playback from the track it's reached.

6. Hold the +10/ALBUM button once during play, the album number flashes;

select the desired album using the SKIP UP/DN buttons or the +10/ALBUM

button; confirm this album selection by holding +10/ALBUM button again,

the track number"000" flickers for your input; select the desired track of the

chosen album using the SKIP UP/DN button or +10/ALBUM button. Finally,

press PLAY/PAUSE button again to begin playing this chosen track.

REPEAT A SINGLE TRACK

UP/DN

To repeat a preferred album in playback, press MODE button twice, "REPT DIR"

shows in the LCD. Then select the preferred album using +10/ALBUM button

and SKIP UP/DN buttons. The player will repeat the chosen album until you

press STOP button.

MP3-C

PLAYBACK

This player is capable of MP3-CDs. It takes longer time for this player to read an

MP3-CD than it does CD-DA. Wait patiently while it is reading.

After an MP3-CD is successfully read, the icon of "MP3" shows in the LCD

together with the total number of albums and tracks. And a second later,

playback begins from the first track of the first album.

SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY

1. Press once the SKIP UP button in music play to skip to the next track. To

skip to a specific track ahead, press this button several times.

2. Press once the SKIP DOWN button in music play to skip to the beginning of

the current track. To skip to a specific track at back, press this button several

times.

3. Press +10/ALBUM button once in play to skip to the track 10 tracks ahead,

twice to skip to the track 20 tracks ahead. You can reach the last track of the

disc using this button. Press this button again at the last track of disc to go

to the first track for playback.

D (WMA)

Advertising