SONIQ QPC60B User Manual

Page 5

Advertising
background image

PROGRAMMED PLAY

Programmed play is that tracks on the disc can be edited for playback in a

preferred order with the use of PROG. button.

In MP3 stop mode, press PROG. button once, "PROG" shows in the LCD with a

flickering album "01" and the program sequence indication "P-01"; select the

album number to be programmed using SKIP UP/DN buttons or +10/ALBUM

button, and press PROG. button again to store; the track number "000" flickers

waiting for your selection. Choose the desired track with SKIP UP/DN buttons or

+10 /ALBUM button. Press PROG. button again to confirm the first programming

and advance to the next programming step. The program sequence indication

changes to "P-02" waiting for your next input.

Repeat the steps above to program more tracks. A maximum of 20 tracks can

be programmed in memory in a preferred order.

Press PLAY/PAUSE button to begin programmed play in the preferred order

after you are done with programming. The player stops automatically after all

programmed tracks are played.

You may press STOP button to terminate programmed playback. In program

stop mode, press STOP button again to clear the programming; press

PLAY/PAUSE button to begin the programmed playback with the programming

order identical with the previous one done.

Press and hold SKIP buttons to initiate high-rate scanning between tracks;

release one of them to begin playback of music at normal speed.

REPEAT MODES

Press MODE button once in play mode to repeat the current track; the LCD

shows the icon for single track repeat.

Press MODE button twice to repeat tracks in the current folder as a whole; the

LCD shows the icon for DIR repeat.

Press MODE button three times in play mode to repeat tracks on stored on this

storage media (USB/MMC card) as a whole; the LCD shows the icon for all

tracks repeat.

INTROSCAN PLAY

Press MODE button for the four times in play mode to activate introscan

playback immediately; the player will pick up tracks for playback of the first 10

seconds of each track in a sequential order after PLAY/PAUSE button is

pressed. You may press PLAY/PAUSE button once again to exit introscan play

mode and return to normal playback from the track it's arrived at.

RANDOM PLAY

Press MODE button for the five times in play to activate random playback

immediately; the player will pick up tracks in a random sequence for playback

after PLAY/PAUSE button is pressed. You may press MODE button once again

to exit random play mode and return to normal playback.

AUXILIARY IN
Your player can be used as a power amplifier to playback the programs from
portable radio, TV set or MP3 player or whatever provided this appliance is so
designed that audio signal may be produced through a LINE-OUT jack or the
like.
Observe the following steps to connect the player to another appliance:
1. Power the player on using the supplied AC Power Cord.
2. Slide Function Switch to CD/MP3/AUX position.
3. Connect the appliance into the player's AUX in socket with the supplied LINE

OUT cable of the appliance.

4. Power on the appliance and begin play.
Easy job, right? At this time you will be able to hear the sound produced from
the programs the connected appliance is broadcasting.

EQ SELECTION
Press PROG./EQ button continuously during disc playback mode to select EQ
sound effects among DBB, POP, CLASSIC, JAZZ, ROCK, and NORMAL.

EXTERNAL MEMORY MEDIA OPERATION (USB,MMC/SD)

Prepare the player for external memory media operation

Insert a USB data traveller into the USB port OR insert a MMC/SD card into the

card slot; slide the FUNCTION switch to the USB/CARD position and playback

will start from the first track.

NOTES:

1. The player reads data from the SD/MMC card by default if both USB data

traveller and MMC/SD cards are inserted. You may press the USB/CARD

button to switch between these modes in stop mode.

2. Operation for switching between USB and SD/MMC is only in stop mode.

3. In USB playing mode: when a SD/MMC card is inserted into the card slot,

USB playing will stop automatically and the SD/MMC card will start playing

from the first track.

4. In SD/MMC card playing mode: when a USB data traveller is inserted into

the USB port, SD/MMC playback will stop automatically and then restart

from the first track.

VARIOUS PLAY MODES

SKIPPING TRACKS AND SEARCHING BETWEEN TRACKS

Press SKIP UP button once to skip the current track and play the next track,

press this button continuously to go to corresponding tracks ahead;

Press SKIP DOWN button once to skip the current track and go back to the

beginning of this track, press this button continuously to go back to

corresponding tracks at back.

Advertising