SONIQ QSL423XT - Manual (Page 5)

Introduction
5
HDMI1/HDMI2/HDMI3 sockets (input) at the back
The HDMI
p
(High-Definition Multimedia Interface) socket lets you connect a device,
such as a digital cable box, with an HDMI output for best picture quality. It also
rovides an uncompressed digital connection that carries both video and audio data
by way of an integrated mini-plug cable.
VGA socket (input) at the back
This socket can be used to connect a computer, or other device with a VGA output.
AUDIO/VIDEO OUT sockets (output) at the back
a VCR to record programs. You must leave
the TV on the same channel you are recording.
composite video connection. (Note: these sockets are only used for AV or S-VIDEO
ouput, but the S-Video output has no color).
These sockets can be used to connect
The VIDEO OUT socket p rovides
YPBPR component sockets (input) at the back
These can be used to connect a device that has component video sockets, such as
a DVD player. The component sockets can recognize if the device you're connecting
to is Y Pb Pr compatible or Y Cb Cr compatible. The component sockets provide
excellent picture quality because the video is separated into three separate parts.
YPBPR component audio sockets (input) at the back
The two sockets can be used to obtain sound when using the YPBPR component
sockets
.
AV1 RCA audio + video sockets (input) at the back
These sockets can be used to connect a range of equipment, including video
recorders, camcorders, decoders, satellite receivers, DVD players, or games
consoles. The VIDEO IN1 socket p
rovides composite video connection.
S-VIDEO socket (input) at the back
The S-Video socket provides better picture quality than the regular video socket
because the color (chrominance, also called chroma) part of the signal is separated
from the black and white (luminance) part of the picture. Remember to connect the
left and right audio cables to the AUDIO IN1 L and R sockets because the S-Video
cable carries only the picture signal, not the sound.
VGA/DVI AUDIO socket (input) at the back
This socket provides audio connection when using the HDMI jack for DVI, or use to
obtain sound when a PC is connected to the VGA INPUT.
SPDIF OUT socket (output) at the back
Use a digital coaxial cable to connect your TV to a digital amplifier. It always keeps
output and keeps the same as the audio frequency of the current source.
ANTENNA IN socket (input) at the back
This socket can be used to connect to an external antenna.
HDMI 1
HDMI 2
VGA
INPUT
VIDEO
HDMI 3
VGA/DVI
AUDIO
INPUT
SPDIF
ANTENNA IN
R
L
Y
Pb/
Cb
Pr/
Cr
AUDIO
L
VIDEO
S-VIDEO
R
AUDIO
R
L
AUDIO
A
V
1
I
N
P
U
T
O
U
T
P
U
T
Note: The location of the s at the back of the television might differ depending
on the model.
ockets
Note: When a Reminder "The current picture mode does not satisfy the MEPS certification,
recommend to press 'Picture' button on the remote control to select 'standard' mode, then
will match the MEPS certification." appears, you can also adjust the Back light on the menu
to make the unit to match the MEPS(Minimum Energy Performance Standards)requirement.
Back light value is less than or equal to 45, above Reminder will not occur. When