SONIQ QSL423XT - Manual (Page 8)

8
TV menu
Sound
Features
Install
The picture menu contains the settings that affect the quality of the picture.
Picture
Channel installation
Preferences
Source labels
Here you can install your channels.
TV menu \ Install
Factory reset Start
Automatic Channel Set-up
This option allows the TV to search for, find and store all the available analog and
digital channels for the antenna or cable input selected. F
1.
2. Press the up or down direction button to select Install, and press the OK button or
the right direction button to display its submenus.
3. Press the up or down direction button to highlight Channel installation, press the
OK button or the right direction button to display its options.
4. Highlight Automatic Search, then press the OK button to begin the channel search.
The search takes a while because it is looking for both digital and analog channels.
The search first looks for digital channels and places the number of channels found
next to Digital channels found, then looks for analog channels and places the
number of channels found next to Analogue channels found. If you want to stop the
search process, press the red button, the channels already found will not be stored.
(Note: Look for an A before the channel number to see if you are watching an analog
channel)
5. When the search is completed, press the red button to finish or press the Menu
button to return, or press the Exit button to close the menu.
This allows you to tune or update all available channels, without altering the sorting
of existing channels.
1. Display the submenus of Channel installation, press the up or down direction
button to highlight Automatic update.
2. Press the OK button to start to update the channels. To stop the update process,
press the red button.
3. When the search is completed, press the red button to finish or press the Menu
button to return, or press the Exit button to close the menu.
If using digital broadcasts, you can check the signal quality of digital channels.
This allows you to reposition the antenna for the best reception.
Display the submenus of Channel installation, press the up or down direction button
to highlight Digital: Test reception, then press the OK button or the right direction
button to enter it.
1. Press the green button to start the test automatically, or first use digit keys to
manually enter the frequency of the channel you want to test, then press the
green button to start the test from the current frequency.
ollow all the steps in turn
specified hereafter.
Press the Menu button to display the main menu.
Using Menu System
This section explores the menus of your TV. Each menu is outlined and detailed to
help you get the most from your TV. To access the menu system:
Press the Menu button to display the main menu(Picture, sound, Features and
Install).
1.
2. Use the up or down direction button to select different options within the menu. If
necessary, press the OK or right direction button to display the choices of the option
you have highlighted. Then use the up/down/left/right direction buttons or OK button
to adjust the menu controls. If available, use the text at the bottom of the each screen
for help.
3. Press the Exit button to exit the menu system directly, or press the Menu button
repeatedly until the menus disappear.
Digital: Test reception
TV menu \ Install \ Channel installation
Back
578.50 Mhz
Start Store
When the signal quality is poor, please check frequency, antenna
connection and position.
Network name: Network TEN
Signal Quality: Good
Signal strength:
Automatic Search
Automatic update
Digital: Test reception
Rearrange
The TV will search for, find and store all the available analog and digital
channels for the antenna or cable input selected.
TV menu \ Install \ Channel installation
Start
Start
Automatic Update
Digital Test Reception
General Operation