SONIQ VBT50 - Manual (Page 3)

Status Operation
LED Indicator&
Sound
Swith On
Press and hold the Multifunction
Key for 3 seconds
A low to high 'dodo' sound.
Flashes blue every 2
seconds indicates in idle
mode.
Swith Off
Press and hold the Multifunction
Key for 5 seconds A high to low 'dodo' sound
and LED indicator goes off.
Connect/
Reconncet
(with Paired
phone)
Select paired device 'VBT5 ' on
mobile phone, and then select
'Connect' 0
The red and blue are
alternately flashing every
second indicates searcing
for paired devices.
Pairing (for the
first time using
the handsfree) 1、
2、Enable Bluetooth feature
of the mobile phone.
3、In the Bluetooth menu,
select 'add device'or ' search
device'.
4、'VBT50' appears in the device
list, press 'yes'.
5、Enter fixed pass key ‘0000'.
Pairing completes.
6、Edit the device name if you
would like to personalize it. Switch on the handsfree. Flashes blue every
2seconds, indicates in
idle mode.
Receive Call
Reject Call
End Call
When handsfree is ringing, press
Multifunction Key once.
When handsfree is ringing, press
Multifunction Key twice.
During a call, press Multifunction
Key once.
Adjust Volume
Automatic shut down
A 'do' sounds
Status Operation
LED Indicator&
Sound
Transfer to phone
During a call, press & hold”+”key
for 3 seconds.
To transfer back,press & hold”+”
key for 3 seconds.
Redial last
number In standby mode, press
Multifunction Key twice.
Voice dial
In standby mode, press
Multifunction Key once.
Mute microphone
During a call.click together'+'and
'-'buttons once. Click again for
un-mute.
A tone from the handsfree
indicates the phone is
ready to receive voice tag.
(you can still hear the
other side)
Clike'+'or'-'button to control the
volume up or down
Handsfree will be switched off
automatically if the connection
between mobile phone and the
handsfree breaks down for more
than 15minutes.
A high to low 'dodo'sound
Low battery Red and 'do' sound
Connect to charging Red always on
Stops red Within 3 hours
Quick User Guide Quick User Guide
If connected with Handsfree
Profile, blue always on
indicates in standby mode.
Adjust Volume
Automatic shut
down
Charging
Charging
completed