SONIQ VBT50 - Manual (Page 5)

7 8
Voice dial In standby mode. Press Multifunction Key o ce . You
will hear a tone from the handsfree. It indicates the
mobile phone is ready to receive tag. Speak the name
of the person you wish to call. Then the mobile starts
the voice dial automatically.
(Ensure the mobile phone supports Voice Control
Dialing before use ) n
Mute microphone To temporarily mute the microphone click together
the volume ‘+’ and ‘-’ buttons once. You will hear
‘do’sounds. This will allow you to hear the other side
but the other side does not hear you. Press ‘+’ and ‘-’
again for un-mute
Press '+' or '-' button to control volume up or down. Adjust volume
Shut down automatically: Handsfree will shut down automatically if the
connection between the mobile phone and the
handsfree breaks down for more than 15 minutes.
Redial the last number: voice dial and call transfer are supported by Handsfree
Profile instead of Headset Profile. For using those functions. Please check if the
mobile phone supports Handsfree Profile
Connect/Reconnect to phone Connect/Reconnect to phone
After the handsfree is switched on .It is waiting to be connected by mobile phone.
The LED indicator flashes blue every 2 seconds indicates idle mode. When the
handsfree and the device are disconnected, the handsfree will return back to idle
mode.
TO connect with phone
EITHER
OR
To connect with the handsfree through the phone, in the setting menu of the
phone,select ‘VBT50’ from ‘Paired Device’. Select ‘connect’and the phone will
connect to the handsfree.
Handsfree Functions
Receive call When handsfree is ringing. press Multifunction Key
once to receive the call.
Reject call When handsfree is ringing, press Multifunction Key
twice to reject the call.
During a call, press Multifunction Key once. End call
Transfer to phone During a call, press& hold '+' key for 3 seconds.TO
transfer back to handsfree. Press & hold '+' key once
for 3 seconds
Redial the last number In standby mode. Press Multifunction key twice.
The last number will be redialed
To connect with paired or reconnect with previously connected phone, press and
hold Multifunction key for 3 seconds to switch on the handsfree. The handsfree
will search and connect to the phone nearby automatically.
( The LED indicator flashes blue every second indicates the searching mode.
The searching may last for ½ minute. If no phone can be found, the handsfree
will return to idle mode. )