Quick start guide, Sound card connection – Sound Devices USBPre 2 User Manual
Page 4
USBPre 2 User Guide and Technical Information
3
Quick Start Guide
Sound Card Connection
Attach the “A” plug of the (supplied) USB cable into an available “A” socket on the computer. Attach
1.
the “B” plug of the USB cable into the “B” socket on the USBPre 2. The USBPre 2’s meter LED’s will il-
luminate sequentially, indicating the USBPre 2 is connected and booting up properly.
Check to see that the operating system has recognized the USBPre 2 and designated the USBPre 2 as the
2.
default sound card.
See Installation and Connection
.
Connect an audio source.
3.
See Inputs
.
Connect headphones or other monitoring equipment.
4.
Powered Monitors
Headphones
Powered monitors with balanced analog inputs can also be attached to
the XLR outputs on the back panel of the USBPre 2.
Press the Input Select button repeatedly until the proper Input Source LED is illuminated for the input
5.
you will be recording.