Sound Devices 633 - Manual (Page 34)

Adjusting Output Levels
The nominal level of analog outputs can be adjusted from Setup Menu op-
tions OUTPUTS > XLR-L Out, OUTPUTS > XLR-R Out, OUTPUTS > TA3-X1 Out, and
OUTPUTS > TA3-X2 Out. The available options are Mic, Line, and -10.
The master level of L, R, X1, X2, X3, and X4 buses can be adjusted in 1 dB increments from 0 dB
down to -30 dB / Off. To adjust the bus levels of L, R, X1, X2, X3, or X4 buses:
1. Press the Meters Button repeatedly until a Meter View is displayed that includes the output
to be adjusted.
2. Rotate the Select Encoder to highlight the meter label of the output to be adjusted.
3. Press the Select Encoder. The background of the output’s meter label will become yellow to
indicate that level adjustment mode is accessed.
4. Rotate the Select Encoder to adjust the level. The dB value will be displayed in the lower right
corner of the LCD during adjustment.
5. Press the Select Encoder again, or wait 2 seconds. The background color of the meter label
will become grey to indicate exit from level adjustment mode.
Output level adjustments do not affect tone signal from the 633’s tone generator.
633 User Guide and Technical Information
28
v. 1.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Output Se
tup and Contr
ol