Sound Devices 633 - Manual (Page 39)

To rename tracks from the Input Settings Screen:
1. Enter the Input Settings Screen of the Track to be renamed. The method for doing this de-
pends on the setting of Setup Menu option INPUTS > PFL Toggle Mode.
2. From the Input Settings Screen, Slide and hold the Input Select Switch in the same
direction used in step 1 and hold it for 1 second. If renaming tracks 4, 5, or 6 with
INPUTS > PFL Toggle Mode set to 3ch, hold down the Select Encoder while sliding the Input
Select Switch.
3. Using the on-screen keyboard or attached USB keyboard, enter the Track’s name.
4. Slide the RTN / FAV Switch right to accept the changes.
To rename tracks from the Setup Menu:
1. Enter the Take List (Press and hold the Menu Button then press the Headphone Encoder or
FILE STORAGE > Take List )
2. To edit track names of subsequently recorded files, rotate the Headphone Encoder to high-
light the next take (indicated by orange text and the phrase “[next]”). To edit the track names
of a previously recorded take rotate the Headphone Encoder to highlight that take.
3. Slide the RTN / FAV Switch to enter the take’s Metadata Edit screen.
4. Rotate the Headphone Encoder to highlight the Track to be edited, then push the Headphone
Encoder to edit that track’s name.
5. Rotate the Headphone Encoder to select a Track Name from the list. If the desired Track
Name is not in the list, scroll to the bottom of the list and select <Add New Entry>.
The list of track names is a single list that is shared between all tracks. The list can contain 70 Track
Names. When the list reaches 70, old Track Names must be deleted before adding new Track Names.
To reset the Track Name list to defaults, choose <Load Default List> from the Track Name list in the
Metadata Edit screen. Note, This will reset the Track Name list for all tracks no matter which track
was selected in the Metadata Edit screen.
Track Names can be displayed on the Meters of the Main Screen. To enable track
names on the meters, select one of the Track Name display styles in Setup Menu option
System > Track Names in Meters. The following screen shots illustrate the available Track Name
display styles.
Meter Appearance Track Name Display Style
Left
Left (w/ramp)
Recor
der Se
tup and Contr
ol
633 User Guide and Technical Information
33