SoundOff Signal Pinnacle LED - Manual (Page 3)

Unpack box:
1. Remove the light bar and packaging.
2. Save packaging for later shipping.
3. Check
components/contents.
4. Please reference this instruction manual for
proper wiring and installation.
Tools Required for Installation:
5/32” Allen Driver
7/16” Socket with ratchet
T-25 Torx Driver
Phillips Head Screwdriver
Electric Drill with #30 (.128 dia.) drill bit
1 1/4” Hole Saw
Components/Contents
Standard Equipment
1- PINNACLE
Lightbar
1- Roof Side Cable Grommet (cable specific)
Controller
1- Breakout Box (DSC Option)
1- Wire
Harness
Optional Mounting Kits
2- Adjustable Height Mounting Brackets (OR)
2- Fixed Height Mounting Brackets
1- Specific Vehicle Hook w/ Hardware Kit (OR)
1- Specific Mounting Hardware Kit
**Kits will vary with each bar
WARNING - DRILLING ANY HOLES INTO THE LIGHTBAR IS NOT RECOMMENDED! THE
RISK OF DAMAGING INTERNAL COMPONENTS AND THE RESULTING FAILURE OF THE
LIGHTBAR WILL VOID ANY WARRANTY OF THIS PRODUCT.
IMPORTANT NOTICE TO INSTALLER: Make sure to read and understand all instructions and warnings before
proceeding with the installation of this product. Ensure that the manual and any warning cards are delivered to
the end user of this equipment. Proper installation of the lightbar requires the installer to have a thorough
knowledge of automotive electronics, systems, and procedures. Lightbars provide an essential function of an
effective visual warning system. The use of the lightbar does not insure that all drivers can or will abide by or
react to an emergency warning signal, especially at high rates of speeds or long distances. The operator of the
vehicle must never take the right of way for granted and it is the operator’s responsibility to proceed safely.
The effectiveness of the this lightbar is highly dependant on the correct mounting and wiring. The installer
must read and follow the manufacturer’s installation instructions and warnings in the manual. The vehicle
operator should verify daily that the lightbar is securely fastened to the vehicle and properly functioning before
operating vehicle. The lightbar is intended for use by authorized personnel only. It is the user’s responsibility
to ensure they understand and operate the emergency warning devices in compliance with the applicable city,
state and federal laws and regulations. (SoundOff Signal assumes no liability for any loss resulting from the
use of this warning device.)
PRE-INSTALLATION
At anytime during your installation process, feel free to call our technical support line at
1-800-338-7337. Press #4 to skip automated message. You can also visit our website at
www.soundoffsignal.com or e-mail technical assistance at [email protected].
Page 4