SoundOff Signal nFORCE Interior - Manual (Page 8)

IMPORTANT INFORMATION:
Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/sales-support.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. at 1.800338.7337 (press #4 to skip the automated message).
Questions or comments that do not require immediate attention may be emailed to [email protected].
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
nFORCE LED Interior Lightbar
ENFWBF(xx)0(x) 5.14
Wire Pin # Wire Color Wire Function
1 Blue/White Rear Inboard 4
2 Green/White Rear Inboard 1
3 Gray Mode Select
4 Black Ground
5 Light Green Data
6 Brown/White Takedown Flash
7 Purple Low Power
8 White Pattern Select / Tail
9 Black/White Left STT
10 Gray/White Arrow - Right
11 Purple/White Arrow – Left
12 Pink/White Ignition Input
13 Blue Front Inboard 4
14 Green Front Inboard 1
15 Yellow Front Inboard 2
16 Orange Front Inboard 3
17 Red V+ Input
18 Pink Scene
19 Red/White Cruise
20 Brown Takedown 1
21 Yellow/White Rear Inboard 2
22 Orange/White Rear Inboard 3
23 Red/Black Right Turn
24 Light Green/White Future use - Sync 2
24 23 22 21 20 19 18 17 16 15 14 13
12 11 10
9 8 7 6 5 4 3 2 1
Connector Pinning Chart
PIN#24 - Light Green/ White PIN#23 - R
ed Black
PIN#22 - Orange/ White PIN#21 - Y
ellow/ White
PIN#20 - Brown PIN#19 - R
ed/ White
PIN#18 - P
ink
PIN#17 - R
ed
PIN#16 - Orange PIN#15 - Y
ellow
PIN#14 - Green PIN#13 - Blue
P
ink/ White - PIN#12
P
urple/ White - PIN#11 Gray/ White - PIN#10 Black/ White - PIN#9
White - PIN#8 P
urple - PIN#7
Brown/ White - PIN#6
Light Green - PIN#5
Black - PIN#4 Gray - PIN#3
Green White - PIN#2 Blue/ White - PIN#1
Functional Inputs
Functional Inputs connect to your control
head or switching unit. Applying +12Vdc
to any functional Input will activate it's
function (default-active high).
15 Amp FUSE
RED 18 GA
.
BLACK 18 GA.
BREAKOUT BOX HOOKUP:
a. Refer to Table 1 for Breakout Box input wire default
functions
b. Make sure the 24-pin connector is snapped in securely.
c. Follow the label for the wire color to connect to a 12Vdc
source, which turns on that given light or lights.
d. Make sure your wire connections are secured and
isolated from any other wire.
*Works with front and/or rear Interior Lightbars
Table 1.
GROUND
(Customer Supplied)
GROUND
POWER CABLE
+12v
Ignition
Switch
8.
WHITE 18 GA.
Switch #1
Switch #2
Green LED
Red LED
BLACK 18 GA.
RED 18 GA.
+12V
TO WHITE WIRE ON LIGHTBAR
LIGHT GRN 18 GA
.
-BLUE WIRE NOT USED
-GREEN WIRE NOT USED
-BROWN WIRE NOT USED