Cambridge Audio 540D V2 - Manual (Page 6)

Front panel display
Title/Chapter
Indicates the chapter title and chapter number fields.
Video format
Displays the video output format: NTSC or PAL.
Time
Shows the hour, minutes and seconds elapsed on the disc.
MP4
Indicates a DivX/MP4 encoded disc is playing.
Decoding mode indicators
Indicate when a Dolby Digital soundtrack is being played back (either
decoded internally or output digitally for external decoding) or DTS
soundtrack (for external decoding only).
Repeat
Shows when Repeat ( ), Repeat All ( ) and A-B Repeat ( )
functions are in use.
Playback
Shows when the disc is being played or paused.
Main information display
Used to display the various functions of the unit.
6
Front panel controls
Standby / On Stop
Play
Pause Skip
Open
Close
azur 540D
DVD Player
1
2
4
3
Standby/On
Switches the unit between Standby mode (indicated by a dim power
LED) and On (indicated by a bright power LED). Standby is a low power
mode where the power consumption is less than 10 Watts. The unit
should be left in Standby mode when not in use.
IR sensor
Receives IR commands from the supplied Azur remote control. A clear
unobstructed line of sight between the remote control and the sensor is
required.
Display
Used to display the 540D V2’s functions and playback state etc. Please
refer to the following ‘Front Panel Display’ section for more information.
Disc tray
DVD/Compact Disc tray. Use the Open/Close button to activate.
Open/Close
Allows you to open and close the disc tray for loading of discs. Pressing
Play will also close the tray and start playing a disc if one is loaded.
Play/Pause
Plays the disc and pauses (freezes) play when playing.
Stop
Press once to stop playback. Pressing Play will cause the playback be re-
started from the same position. Press again to fully stop playback.
Skip
Press once to skip between tracks/chapters.
1
2
3
4
5
6
7
8
5 6 7 8
5 6
1
2
3
4
5
6
7
8
8
4 3
7
1 2