Getting started – Cobra Electronics COBRA MARINE MR F45-D User Manual

Page 15

Advertising
background image

Nothing

Comes Close to a Cobra

®

Getting Started

25

DSC Position Request Alarm

Medium-loud, continuous, low-pitched series of closely spaced, four (4) beeps

[three (3) short – one (1) long] groups — sounds when a POSITION REQUEST call

is received. Press any button to turn it Off.

DSC Individual Alarm

High—pause—high—pause—high. Long pause, then repeat. Press any button to

turn it Off.

Weather Alarm

Medium-loud, continuous, medium-pitched series of one-half (

1

2

) second beeps

spaced one-half (

1

2

) second apart — sounds when weather alert is turned On

and NOAA sends a 1050 Hz weather alert tone on the selected weather channel.

Press any button to turn it Off.

Operating Your Radio

24 English

Getting Started

Getting Started

Refer to the foldout on the front cover of this manual to identify the various

controls and indicators on your radio.

Throughout this manual you will be instructed to press or to press and hold

buttons on the transceiver or on the microphone. Press means a momentary

press, then release; press and hold means to hold the button.

Tones And Alarms

When your CobraMarine VHF radio is On, you can expect to hear the following tones

and alarms. The volume of these sounds is controlled by the circuitry in the radio

and is not affected by the volume set with the On-Off Power/Volume knob.

Confirmation Tone

Single high-pitched beep confirms all button presses except the Talk button.

It can be turned On or Off. See set-up routines on page 40.

Error Tone

Two low-pitched beep indicates an invalid button press.

DSC Distress Alarm

High—low—high—low—high. Pause, then repeat. The volume of all alarms will

increase after 10 seconds. Press any button to turn it Off.

NOTE

This alarm sounds only for DSC distress calls on Channel 70.

It does not sound for voice calls on Channel 16 — you still

must listen for those.

Distress Acknowledgement Alarm

High—low—high—low—high. Pause, then repeat. The volume of all alarms will

increase after 10 seconds. Press any button to turn it Off.

DSC Routine Call Alarm

High—pause—high—pause—high. Long pause, then repeat. Press any button to

turn it Off.

DSC Geographical Alarm

Loud, continuous, medium-pitched, high-low tones (warble) — sounds

when a geographical call is received. Press any button to turn it Off.

Operating Your Radio

F45D_Install_Eng:8186-F55_Install-Eng 11/23/10 10:49 AM Page 34

Advertising