Digital select calling (dsc) setup – Cobra Electronics COBRA MARINE MR F45-D User Manual

Page 22

Advertising
background image

Digital Select Calling (DSC) Setup

Digital Selective Calling (DSC) uses digital signals to increase messaging range. This

provides the most reliable message delivery per watt of output power. Digital signals

are less susceptible to distortion from noise and atmospheric conditions than analog

signals.

DSC equipped radios also interface with GPS and automate many operations for

sending and receiving messages. This results in compact, accurate messages and

less airwave congestion.

Setup procedures for all DSC features use the Setup menu. Refer to page 40 for

information on entering and exiting the Setup menu.

User MMSI Number

The nine (9) digit MMSI number, similar to a telephone number, is a unique identifier

for a vessel. DSC incorporates this number into every message that is Sent (Tx) or

Received (Rx). Enter the MMSI number as soon as you receive your MMSI number

from the issuing agency listed on page 9.

NOTE

The radio does not operate in the DSC mode until an official MMSI number is

entered. An error tone will sound when attempting to operate in the DSC

mode without an MMSI number.

NOTE

An MMSI number can only be entered one time. To create a new MMSI

number, the unit must be reset by the dealer.

Digital Select Calling (DSC)

Setup

39

To Enter Your MMSI Number:

1. Enter the Settings menu and scroll to

USER MMSI

with the Up/Down buttons.

2. Press the Call/Set button and the blinking cursor will

appear at the first digit under

USER MMSI ID ENTRY

.

3. Use the Up/Down buttons to scroll through the number

list to that digit of your number.

4. Press the Call/Set button to select the digit and the

blinking cursor will move to the next digit of the number.

5. Repeat steps 3 and 4 until all nine (9) digits of your

MMSI number are entered.

NOTE

Press the High/Low Power button to backspace

and erase the last selected number.

6. Check that you have entered the number correctly. The

unit will ask you to re-enter your number to confirm.

7. Press and hold the Call/Set button to return to the

Settings menu.

Operating Your Radio

User MMSI ID Entry

User MMSI

Nothing Comes Close to a Cobra

®

38 English

Digital Select Calling (DSC)

Setup

Operating Your Radio

F45D_Operation_Eng:8186-F55_Operation-Eng 11/23/10 10:49 AM Page 48

Advertising