Craftsman 316.79192 User Manual
Page 7
7
OPERATING INSTRUCTIONS
HOLDING THE UNIT
Before operating the unit, stand in the operating position (Figs.
7–9). Check for the following:
•
The operator is wearing eye protection and proper
clothing.
•
The right arm is slightly bent, and the hand is holding
the shaft grip.
•
The left arm is straight, and the hand is holding the D-
handle.
•
The unit is at waist level.
•
The trimmer/blower attachment is parallel to the
ground and is positioned so debris is blown away from
operator.
Fig. 7
OPERATING TIPS WHEN USING TRIMMER/BLOWER
ATTACHMENT
•
To reduce the risk of hearing loss associated with
sound level(s), the use of hearing protection is
required.
•
Operate power equipment only at reasonable hours –
not early in the morning or late at night when people
might be disturbed. Comply with time listed in local
ordinance. Usual recommend-ations are 9:00 am to
5:00 pm, Monday through Saturday.
•
To reduce noise levels, limit the number of pieces of
equipment used at any one time.
•
To reduce noise levels, operate power blowers at the
lowest possible speed to do the job.
•
Use rakes and brooms to loosen debris before blowing.
•
In dusty conditions, slightly dampen surfaces or use a
mister attachment when water is available.
•
Conserve water by using power blowers instead of
hoses for many lawn and garden applications,
including areas such as gutters, screens, patios, grills,
porches, and gardens.
•
Watch out for children, pets, open windows, or freshly
washed cars, and blow debris away.
•
After using blowers and other equipment, CLEAN UP!
Dispose of debris in trash receptacles.
Fig. 8
Fig. 9
WARNING:
To prevent serious injury to yourself
or others, or possible damage to property, never
point the blower in the direction of people or pets,
or in the direction of windows. Always direct the
blowing debris away from people, animals, and
windows. Use extra caution when blowing debris
near solid objects such as trees, automobiles,
walls, etc.
WARNING:
Always wear eye, hearing, foot and
body protection to reduce the risk of injury when
operating this unit.
LINE REPLACEMENT
for Hassle-Free IV™ Cutting Head
Always use Craftsman Hassle-Free IV™ XTRA QUIET Spiral Line.
NOTE:
Before inserting new line into the holes in the cutting
head, identify the proper holes. Follow directions as shown
on the line glide plate. DO NOT attempt to remove the
cutting head from the unit when replacing line.