TeachLogic Titan Neo - Manual (Page 30)

30
Titan Neo
product description
TROUBLESHOOTING
UT-96HH Transmitter Microphone
Power LED does
not illuminate after
pressing power switch
LCD panel displays
garbled information
No sound output
Interference and Signal
disturbance
• Check batteries are charged and inserted correctly.
When pressing power switch ensure you hold it
down for 2–3 seconds
•
• Remove the batteries from the transmitter and
re-insert them
•
• Confirm frequency of transmitter is the same as the
portable PA receiver
• Check volume level of both transmitter and
portable PA receiver in range of the receiver
• Check for sources of interference, large metal
objects etc within range of the microphone
•
• Make sure there are no other wireless systems
operating on the same frequency in the same area.
This includes Microphones, Televisions, Radio
Stations, etc.
• When operating two transmitters in the same area,
ensure frequencies selected are several channels
apart. This helps to reduce crosstalk between
transmitters.
• Also note that other wireless devices can cause
interference, ensure you adjust your frequency
around these devices where possible.
• Try setting the transmitter and receiver to a new
channel.
Problem Solution