TeachLogic Titan Neo - Manual (Page 33)

33
Owner’s Manual
TROUBLESHOOTING
BT-800 Wireless Bluetooth Receiver
• Check that you are in range of the Bluetooth accessory with
which you are trying to connect. Most Bluetooth accessories
have a range of approximately 30 feet.
• On your device, tap Settings> Bluetooth and find you device
in the list. If your device says Not Connected, tap the name of
your accessory to attempt to connect it.
• Tap Settings> Bluetooth and turn Bluetooth off and then on
again.
• Make sure that your Bluetooth accessory is turned on and fully
charged or connected to power.
Unexpected Bluetooth disconnects or intermittent connectivity
Source of Interference
• Microwave ovens: Using your microwave oven near you
computer, Bluetooth device, or Wi-Fi base station may cause
interference. Bluetooth operates at 2.402 - 2.480 GHz
• 2.4 GHz or 5 Ghz phones: A cordlwss telephone that operates
in2.4 GHz or 5 GHz bandwidth.
• Any other wireless devices that operate in the 2.4GHz or
5GHz bandwidth (Microwaves, Cameras, baby monitors,
neighboring wireless devices, etc.
Environment Barriers
• Wood, Synthetic materials, Glass
• Water, Brick, Marble
• Plaster, Concrete, Bulletproof glass
• Metal
• Low
• Medium
• High
• Very High
• If possible, avoid wireless barriers, or change the placement
of the Wi-Fi or Bluetooth devices for a clearer signal path.
The device's location within building and construction
material used can affect Wi-Fi and Bluetooth. Listed below
are common types of barrier material and their potential for
interference.
Potential Material